Konnwei KW510 car battery tester with test & repair & recharge function in one

Konnwei OBD2 scanner and battery tester catalog El...

• 【Wider Testing Range】 Get more with your auto battery tester! Compared to normal battery tester’s testing range 100~1100 CCA, KW208 car battery tester is wider and more superior as it can test all 12V 100~2000CCA batteries compatible with regular flooded, AGM flat plate, AGM spiral, or gel batteries. It also covers most of the battery rating standards like CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB, etc.
• 【Faster & More Accurate】One of the highlights on KW210 12V battery tester is its powerful STM-32 chip, which provides more precise testing reports within milliseconds, greatly improves the speed and ensures the accuracy. Besides that, KW210 is the only automotive battery tester that supports the UPDATE function (great support & new additions). It’s time to analyze faster and better with the ultimate battery and alternator tester.
• 【Display Overall Batteries Data】After the test is fully done, our Car Auto Battery Load Tester gives you the basic battery parameters such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status. Additionally, the KW210 battery cca tester will also give you professional advice according to it then decide whether to replace or charge the battery and inform you about the battery status in advance to prevent possible battery failures.
• 【Simple to Use Plug and Play Design】 Designed with simplicity and convenience in mind, the Battery load analyzer allows you to test batteries both in-vehicle and out-of-vehicle, and even test dead batteries. Just connect the tester’s clips with battery then it will turn on and ready to test and analyze battery. It’s that easy!
• 【Starter& Alternator Tester】KW210 is not only a great battery load tester that tests batteries cranking & charging system, but also can test alternator's charging and starter's cranking conditions. And it can switch up to 8 languages for different needs. Works for Vehicles/Marine/Motorcycle. Now there is nothing stopping you to get this car battery diagnostic tester RISK-FREE!

• Battery Cranking Test, load test Battery Charging Test, Ripple Test.

KW510 battery tester key functions & features

1.System voltage: 12 V
2. Test Result: Good, Recharge or Replace.
3. Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
4. Internal resistance value (mΩ).
5. Life in percentage (%).
6. Cranking system.
7. Charging system.
9. Record and re-play battery data, Life-time free update service.
10. Battery test, cranking test, charging test and other additional functions.

Specifications
Features:
Fast and smooth running speed with STM32 chipset hardware.
Identify battery status Good or Replace.
Check Battery Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
Check Internal resistance value (m).
Display Life in percentage (%).
Battery Cranking Test, load test Battery Charging Test, Ripple Test.
Graphing voltage real-time monitoring.
Test results storage and review.


Application:
Use to test a wide range of 12V batteries (Starting, Deep Cycled and Marine) of Wet(Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF),Absorption Glass Mat(AGM), EFB and GEL Cell.
The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,GB,DIN and IEC are supported.