Brief introduction
WD-E1000M transfers network signals through the existing phoneline, it’s transmission rate up to 1Gbps which can meet many demands of several kinds of businesses. Support IEEE 802.3,ITU-T G.hn-MIMO(G.9963) as well as G.hn standard.
Topology
Specification
Specification | |
Model | WD-E1000M |
Interface | 1*LAN 10/100/1000M RJ45,1*DC12V |
LED display light | ETH PLC PWR |
Transmission band | 2-100MHZ |
Protocol | ITU-T G.hn-MIMO(G.9963) |
IEEE 802.3 | |
Security | 128-DES |
802.1D Ethernet Bridge | |
802.1QVLAN,QualityofService(QoS), | |
IGMP(IPV4) Snooping & MID(IPv6) Snooping | |
Transmission rate | 1Gbps |
Modulation | OFDM,FEC,Flexible frequency configuration |
Management | HTTP Web-based;Firmware upgrade via TFTP |
TR-069 Supported(Optional) | |
Working voltage | DC12V 1A |
Operating environment | Working temperature:0℃-70℃ |
Working humidity:8%-95% no condense | |
Weight | 0.2kg |
Certification | FCC,CE,ROHS |
Features
1. Provide 1Gbps transmission rate, meet many demands of the several kinds of businesses.
2. Take phoneline as transfer medium, no wiring.
3. No setting, plug and play.
4. The maximum transmission distance up to 2000m.
5. Meet the demands of G.Hn
6. Support IGMP: IGMP(IPV4) Snooping & MID(IPv6) Snooping.
7. Low power consumption design:≤0.5W(in standby mode)
8. IEEE 802.3/IEEE802.3u ,Compatible with current network protocol.
9. The signal is stable and not interfered by high power electric devices.