Campetition Outdoor Inflatable Activities Arch Start Finish For Party Event

This image features two inflatable arch structures made of yellow and black plastic or rubber material. Each arch has a base and a top beam, adorned with flame patterns and the words. A string of numbers, 0.14234, is also displayed on the top beam.

Specifications:

Usage tutorials for some common inflatable products:
Inflatable arch:
Preparation before use: Choose an appropriate placement location to ensure the ground is flat, free of sharp objects, and has enough space. At the same time, consider the surrounding environment and avoid using it in places where there may be branches, communication cables, etc. that could scratch the arch. Secure the power cord to ensure it will not be affected during operations such as opening and closing the door. Check the weather forecast. If it is windy, prepare fixed ropes and additional sandbags. If the wind force reaches above level six, it is not suitable to use. Deployment and fixation: Open the arch bag and unfold the arch. Tie ropes on the two rope buckles at the front of the arch respectively, and do the same for the two rope buckles at the back. Stuff sandbags into the two feet of the arch on the ground to increase the stability of the arch. Inflation and adjustment: Use inflation equipment such as an air pump to inflate the arch. During the inflation process, pay attention to observing whether the shape of the arch is normal and whether there are any distortions or deformations. Adjust the position of the arch. If it is unstable, use the ropes on the front and back rope buckles to fix the arch.

FAQ
Q: How to repair when damage?
A:
Step 1: Identify the Damage
Thoroughly inspect the inflatable to locate any tears, punctures, or leaks.
Step 2: Clean and Dry the Area
Clean the damaged area with mild soap and water to remove dirt or debris. Allow the area to dry completely before proceeding with the repair.

Step 3: Patch the Damage
Apply a patch specifically designed for inflatable repairs over the damaged area. Make sure the patch is slightly larger than the damaged area to ensure proper coverage. Press the patch firmly onto the surface, smoothing out any wrinkles or air bubbles.

Step 4: Apply Adhesive
If using a patch that requires adhesive, apply a thin, even layer of adhesive to both the patch and the inflatable surface. Allow the adhesive to become tacky before pressing the patch onto the surface.

Step 5: Allow Time to Cure/Allow the Adhesive to Dry
Once the patch is in place, you'll need to allow the adhesive to dry completely. This may take several hours, depending on the type of adhesive you are using. It's important to avoid using the inflatable until the adhesive is completely dry, as this could cause the patch to come loose. Wait at least 1 hour before inflating again.

Step 6: Test the Repair
Once the patch has cured, inflate the inflatable and check for any signs of leakage. If the repair holds, the inflatable is ready to be used again.

It's important to use repair materials specifically designed for inflatables and follow the manufacturer's instructions carefully to ensure a successful repair. If the damage is extensive or beyond your ability to repair, consider seeking professional assistance.

-
Q: Accessories included?
A: Free accessories include Storage Bag / Repair Kit / Warning Label / Custom Logo .