Pneumatic Clamping Electronic Single Fiber Strength Tester Textile Testing Instruments

Model: FZ-005N

Standards

GB/T14337; GB/T9997; GB/T13835.5;GB/T21120; ISO5079;ISO11566; ASTM D3822;BS4029, etc

Scope of application

It is used to measure the breaking strength, initial modulus, breaking elongation, constant elongation load, constant load elongation, creep, etc. of various single fibers.

Features

1. Microcomputer control is adopted to support online communication.

2. The force measurement system with high accuracy and high speed is adopted, and the test data is accurate.

3. The pneumatic gripper with unique patented technology can hold the sample with constant holding force and stability, which can ensure that the clamping surface fully fits and prevent the sample from being pinched or slipping in the experiment.

4. A low noise and stable driving system is composed of high-precision ball screw and internationally renowned high-performance stepping motor.

5. Communicate directly with the computer through the high-speed USB port, provide detailed on-side historical data, reports, graphics, and establish a database.

6. Large screen LCD Chinese menu display, intelligent interface, human-computer interactive dialogue operation, Chinese report and curve graphics output by printer.

7. It can store 300 times of test data and has the function of power-off saving.

8. The operation area adopts LED lighting with soft light, which is convenient for the tester to sample and test.

Specifications

1. Type: constant rate elongation (CRE)

2. Clamping method: pneumatic clamping

3. Force measurement range: 0~200cN Resolution: 0.01cN

4. Measurement accuracy: ± 0.5%

5. Gauge length: 5~60mm (digital setting)

6. Large elongation: 130 mm

7. Tensile speed: 2~100mm/min (digital setting)

8. Test method:

1. Constant speed stretching 2. Constant elongation load

3. Constant load elongation 4, creep 5, initial modulus

9. Test data output mode:

1. LCD Chinese menu display: various setting parameters and test values

2. Printout: test report and tensile curve graph (prepared by computer)

10. Printer configuration: 24-pin printer

11. Power supply voltage: AC220V ± 10% power: 50W

12. Boundary dimension: H450 * D510 * H580mm