SLPT Automatic static load pile tester(6channels/12channels)

Application: Used for testing the pile loading capacity by static method. Compared with the dynamic testing method, the static pile testing will take longer time with different loading grade. So it can check the displacement under the different loading force through the high precision displacement gauge. The systemcan be used for the Static Axial Compressive Load testing, and also can be used for the lateral load testing.

Standard:

ASTM D1143 Standard Test Method for Deep Foundations Under Static Axial Compressive Load

ASTM D3689 Standard Test Method for Individual Piles Under Static Axial Tensile Load

ASTM D3966 Standard Test Method for Deep Foundations Under Lateral Load

Parameters:

Features:

1. Adopt 10.4 inch color touchable and colorful LCD screen.

2. 24 bit high AD resolution.

3. Easy operation, even for normal simply trained workers can control whole sets.

4. Console is powered by 12V DC instead of 220v. It is more stability and anti-interference.

5. Real-time to show Experience information, Q-S curve, S-lgt Curve, Sensor displacement.

6. Clients can set difference grade, load number and reading number optionally.

7. Project testing and Data collecting is totally automatically: Auto Loading, Auto Pressure compensation, Auto Data reading, Auto Stability judgment and Data saving.

8. With auto alarm function for safety protection.

9. Sensor data can upload to console by wire or WIFI up to 1000m.

10. Wireless Channel upto 50. It supports multi sets (50sets) work at same time for a work situ.

11. Continually work automatically after power is suddenly off.

12. Displacement sensors can be installed with two methods, to pile or to beam.

13. Date output is by U disk.