Rapid Antigen Saliva Test Kit SARS-CoV-2 Antigen Saliva Rapid Test Kit

Intend Use
The rapid test kit is intended for the qualitative detection of SARS-CoV-2 antigen in hunman saliva samples from novel coronavirus suspected person with symptoms within 9 days from onset. It can be used for early triage and rapid management of suspected populations, but it cannot be used as diagnosis basis of SARS-CoV-2 infection. Further nucleic acid detection should be carried out for suspected population whose antigen test result is positive or negative.

Product Details

Product Feature

• Fast: Read the result within 15 mintues
• Accurate: Total accuracy more than 95%
• Protable: Single pack, easy to carry
• Simple: Simple operation step to test

• Main Components
• 1 Test Cassette
• 1 Saliva Collector With Collection Tube
• 1 Sample Extraction Buffer
• 1 Package Insert

Use Step

• Open the cap of the collection tube and istall saliva collector.
• Put the collection tube with saliva collector close to lips and let the saliva flow into the collection tube. Tje volum of saliva needs to be half of 0.5 scal mark(0.25).
• Screw the sample extraction buffer carefully.

• Add all sample extration buffer to the collection tube. Discard the saliva collector, tighten the cap onto the specimen collection tube.
• Shake the specimen collection tube at least three time vigorously to mix the saliva and the extraction buffer. Squeeze bottom of the collection tube ensure the saliva is thoroughly mixed.
• Add 3 full drops of the solution to the sample well(S). Read the result at 15 minutes. Do not interpret the result after 20 minutes.

Result Interpretation

• POSITIVE: Two (2) distinct colored lines appear. One line should be in the control region (C) and the other line should be in the test region (T).

• NEGATIVE: One (1) colored line appears in the control region(C). No apparent colored line appears in the test region (T). The negative result does not indicate the absence of analytes in the sample, it only indicates the level of tested analytes in the sample is less than the minimum detection limit.

• INVALID: No colored lines appear, or control line fails to appear, indicating that the operator error or reagent failure. Verify the test procedure and repeat the test with a new testing device.

Virus Sources

Certificate