Hematology Reagent For Coulter Act Diff Series Analyzers High Performance Hematology Reagents
Intended Use
To be used for blood cell counting, sizing, and WBC differentiation, hemoglobin determination on Coulter Act Diff series hematology analyzers. This product is for In Vitro Diagnostic Use only.
PRECAUTIONS
- Re-calibration is recommended when changing the origin of the reagents.
- It is not recommended using different brands of solutions together on one unit of analyzer.
- Do not ingest. Avoid contact with skin and eyes.
- Skin contact: Flush with plenty of water.
- Eyes contact: Flush with plenty of water. Obtain immediate medical attention.
- This kit is for professionals and in vitro diagnostic use only.
PROCEDURES
- Remove all the reagent aspiration tubes from the currently used reagent boxes
- Wipe the tube’s surface with a lent free tissue, and then rinse with distilled water.
- Put all the tubes into the boxes and/or bottles of Labnovation reagents.
- Run at least 50 backgrounds. Check for the acceptable values. At first high background counts can be seen, that should lower to normal after a few runs.
- Run all three levels of a dedicated commercial control. Check for the acceptable values.
- Recalibrate the unit if necessary.
Specification
77-10-010 | ACT PACK | ISOTONIC DILUENT 15L+LYSE DIFF 300mL (1 pc MANAGEMENT CARD) |
77-40-E05 | E-Cleaner | 500 ML |
KIT COMPOSITION
E-Cleaner | Buffer<0.3%, Proteolytic Enzyme<0.2% |
ISOTONIC DILUENT | NaCl≤9.4%, Buffer≤1.6%, Anti-Microbial Agent≤1% |
LYSE DIFF | Quaternary Ammonium Salt<10%, Sodium Lauryl Sulfate<1.5% |
APPLICABLE INSTUMENT
For use with Beckman coulter AcT diff,AcT diff 2 hematology analyzers
Storage
- Store the product at 5-35℃ in a dust free place with good ventilation. Temperature outside the range may damage the product.
- The open vial life of the product is 30/60 days. Unused reagents should be discarded after 30/60 days. Do not mix residual with a new carton.
Advantage
- One source for all brands of analyzer
- Reagents for both 3-parts and 5-parts
- Ready-to-use final products and bulk OEM reagents
- ISQ13485:2003 and ISO9001:2008 certified
- CE marked, FDA cleared
- Well-established brand used by thousands of lab in 95 countries
- High quality, high performance and high fidelity of correlations with original brand.