Hematology Reagent For Coulter Gen.S , LH-750, LH-780, DXH-800 Analyzers High Quality Reagents
Intended Use
To be used for blood cell counting, sizing, and WBC, RET differentiation, hemoglobin determination on Coulter GEN.S , LH-750, LH-780, DxH-800 hematology analyzers. This product is for In Vitro Diagnostic Use only.
Procedures
- Remove all the reagent aspiration tubes from the currently used reagent boxes
- Wipe the tube’s surface with a lent free tissue, and then rinse with distilled water.
- Put all the tubes into the boxes and/or bottles of Labnovation reagents.
- Run at least 50 backgrounds. Check for the acceptable values. At first high background counts can be seen, that should lower to normal after a few runs.
- Run all three levels of a dedicated commercial control. Check for the acceptable values.
- Recalibrate the unit if necessary.
Precautions
- Re-calibration is recommended when changing the origin of the reagents.
- It is not recommended using different brands of solutions together on one unit of analyzer.
- Do not ingest. Avoid contact with skin and eyes.
- Skin contact: Flush with plenty of water.
- Eyes contact: Flush with plenty of water. Obtain immediate medical attention.
- This kit is for professionals and in vitro diagnostic use only.
Specification
L-8547196 | RET STAIN | 380 ML |
L-8547197 | RET LYSE | 1900 ML |
L-8546983 | LYSE DIFF | 1 L |
L-8546733 | ISOTONIC DILUENT | 20 L |
L-8546930 | E-CLEANER | 5 L |
KIT COMPOSITION
RET STAIN | New Methylene Blue 0.06% |
RET LYSE | Sulfuric Acid 0.15% |
LYSE DIFF | Quaternary Ammonium Salt<10%, Sodium Lauryl Sulfate<1.5% |
ISOTONIC DILUENT | NaCl≤9.4%, Buffer≤1.6%, Anti-Microbial Agent≤1% |
E-CLEANER | Buffer<0.3%, Proteolytic Enzyme<0.2% |
APPLICABLE INSTUMENT
- For use with Beckman coulter GEN.S , LH-750, LH-780, DxH-800 hematology analyzers.
Advantage
- One source for all brands of analyzer
- Reagents for both 3-parts and 5-parts
- Ready-to-use final products and bulk OEM reagents
- ISQ13485:2003 and ISO9001:2008 certified
- CE marked, FDA cleared
- Well-established brand used by thousands of lab in 95 countries
- High quality, high performance and high fidelity of correlations with original brand.
Storage
- Store the product at 5-35℃ in a dust free place with good ventilation. Temperature outside the range may damage the product.
- The open vial life of the product is 30/60 days. Unused reagents should be discarded after 30/60 days. Do not mix residual with a new carton.