Rapid Antigen Test Kit SARS-CoV-2 Antigen Rapid Test Kit Self Testing Sinple Operation Step Antigen Rapid Test Kit

Intend Use

The SARS-CoV-2 Antigen Rapid Test Kit is intended for the qualitative detection of SARS-CoV-2 viral nucleocapsid antigens from human anterior nasal of secretion from individuals suspected of COVID-19. It is for individual self testing use, the test result can be used for early self-screening. It can be used as a basis for judging whether infection or not.

Product Details

Test Principle

This SARS-CoV-2 Antigen Rapid Test Kit is an immunochromatography assay which detects SARS-CoV-2 nucleocapsid antigen in the samples with the help of the double antibody sandwich method. If there is virus antigen presence in the sample, it binds with the corresponding colloidal gold antibody. In the testing process this will creates a visible red line, you can accroding the red lin to judge the sample contain antigen or not. But it need to be attention that regardless of whether the sample contains antigen or not, a reddish line forms in the Control line (C).

Product Feature

• Reliable: CE Certificated, Stric quality control
• Accurate: Total accuracy >95%,
• Fast: Quick Testing speed with strong C/T line
• Simple: Easy for use,Simple operate process

Main Components

• Test Cassette
• Sample Tube
• Extraction Buffer
• Swab
• Instruction for use

Use Step

Notic: Let test cassette and test components stand at a room temperature (15℃ to 27℃) before performing the test.

Lay all the supplied materials on a clean, dry and flat surface.

• Open the sealed pouch and remove the test casstette. Lay it face up on a clean, dry and flat surface.
• Unpack the sample extraction, add all of the sample extraction into the sample tube and then put the tube into tube stand.
• Gently, insert the entire absorbent tip of the swab (around 1.5 cm) into your nostril. Rotate walls of your nostril 5 times or more. Use the same swab to repeat steps in the other nostril.

• Insert the swab into the ssample tube with extraction buffer. Mix well. Mix well and squeeze the swab 10-15 times by compressing the walls of the tube against the swab. Roll the swab head against the inner wall of the tubes as you remove it.
• Close the cape of the sample tube. Add 3 full drops of the mixed solution vertically into the sample well(S) of the test cassette.
• Read the result 15-20minutes after adding the sample. Result got after 20 minutes is invalid.

Result Interpretation

• POSITIVE: Two colored bands appear on the membrane. One band appears in the control region (C) and another band appears in the test region (T).

• NEGATIVE: Only one colored band appears, in the control region (C). No apparent colored band appears in the test region (T).

• INVALID: If there is no Control line (C) or only a Test line (T) in the result window, the test did not run correctly and the results are not valid.

Virus Sources

Certificate