Product Description:

The instrument is composed of intelligent controller, force measuring mechanism, distance measuring mechanism and printer. The intelligent controller is composed of CPU, motherboard, LCD, keyboard, power supply and so on. The screen is displayed in all Chinese windows, and the keyboard controls the cursor for options, operation and setting. It can be operated according to the prompts without training.

Product introduction:

It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Nominal specification, test times, uplink, downlink, time, calibration. The menu on LCD is controlled by keyboard, and test data is printed on board. It fully meets the test requirements of GB 15811, and the program has two test methods.

The test range is 0-80n, the error is not more than ± 0.1N, and the resolution is 0.01N;

Setting range: 2n ～ 80N, the error is not more than ± 0.1N;

Test time: 1 ~ 99S, set arbitrarily, the error is not more than ± 1s;

Loading degree: 0.2n/s ~ 0.5n/s.

There are two test methods

1. Maximum load test (destructive test);
2. Setting the loading time and loading load test (for example: setting the slow loading of 15N and holding for 15s can be used for the tensile strength test of infusion set). The connection force of the connector, catheter and all parts of the infusion set can be measured.

Net weight: 8kg

Overall dimension: 400 × 290 × 240 (mm)

Technical parameters:
Environmental Science:

Working temperature: 5 ～ 40 ℃

Relative humidity: 45-80%

Power supply voltage: 220 V ± 22 V

Power grid frequency: 50 Hz ± 1 Hz

Display mode:
It adopts 320 × 240 single color liquid crystal display screen and all Chinese windows display.

The menu on LCD and the analog keyboard on LCD are controlled by keyboard.

Power consumption: 200va

The loading range of the instrument is 0 ～ 80N and the accuracy is ± 0.01N.