TENCAN Lab Sample Grinder Shatterbox three grinding bowl 300g Capacity Swing Mill

Overview

Lab sample grinder/ Swing mill GJ-3 is also called sealing type sampling machine laboratory, sealed testing grinder, sealed timing grinder, sealed type pulverizing machine. which is mainly used for powder making of raw materials for laboratory testing. Vibratory sampling grinder is widely used in the industries of coal, coking, non-ferrous metal smelting, mining and other industries. For example, in the fields like coal, coke, gangue, all kinds of ore and so on.

The working mode of vibratory sample grinder: vibratory grinding type. In the bowl, the material is packed in the bowl, and the crushing ring and the crushing hammer are in the bowl. Materials are crushed and milled by the crushing ring and the crushing hammer in the high speed rotation withIn 2-6 minutes, and can be ground quickly into 80-200 meshes (0.175-0.075mm) micron powder samples, which are directly used for testing.

There are several bowls such as normal steel bowl, high manganese steel bowl, wear-resistant alloyed steel bowl, chrome steel bowl and tungsten carbide bowl. Selection of bowl often depends on hardness of material.

Working Principle

The material is placed in a sealed material bowl. There is a crushing hammer and a broken ring in the bowl. The motor drives the eccentric hammer to rotate at high speed. The material is made to be made of powder by vibration impact force and friction force.

This powerful ring & puck mill grinds tough, brittle samples in minutes. It has a sound proof enclosure and accommodates samples up 300 grams. Visit www.lab-mills.com for more information.

Typical Samples

Cements, Soils, Ceramics, Slag, Rocks, Minerals, Ores,
Pharmaceuticals, Sulfur Pellets, Dried Plant Material and
slurry samples.

Features

• Swings a dish-shaped grinding container with a puck & ring,
• in a tight high-speed circle, rapidly crushing samples.
• Soundproof enclosure reduces noise levels and features an
• easy-to-use enclosed cam-action clamp.
• Membrane control panel featuring a 10 minute electronic timer that counts down the time remaining. The “pause” function allows interruption of a grinding cycle.
• Equipped with a safety interlock system and lid gas cylinders for operator protection.
• Sound-insulated steel cabinet has a cooling fan to prevent
• the motor from overheating and lockable casters enabling
• the mill can be moved about the lab and then fixed in place.

Technical Parameters