Class B Autoclave Steam Sterilizer With 3 Times Vacuum , Fuzzily Computer Controlled
Model:MC-KM16
What are the features of our dental Steam Sterilizer ?
- Standard Class B with three times vacuum and drying, the remaining temperature of sterilized instrument is less than 0.2%.
- The vacuum data can reach -0.8bar,it fits various instrument,including package,unpackaged,solid,hollow,multi-apertures and inset pipes. It makes sure the instrument can be sterilized completely.
- Fuzzily computer controlled, digital bright show. The interface is modularized panel for easy operation.
- It is installed with BOWIE&DICK which measures the penetration of water steam.
- it has vacuum text which can make sure the ability of texting vacuuming.
- Sterilization cycle self-comment.
- Fast and independent steam generator.
- Large capacity instrument tray made of SS. SU304.
- Safety lock and triple temperature.overload protecting
- Auto/Manual water adding
- Inset cleaning device
- Special function of creating medicine cotton and sterilizing rubber items
- Handsome aspect and good quality
- Cristal LCD display
- 5-Button panel with the LCD display, so convenient.
- Warning message, Error is made easier to judge.
Technical data
Model (LCD/ LED) | 16 L | 18 L | 23 L |
Classification | Class B |
Insulation Class | Class II |
AC Power | 220V/50Hz; 220V160Hz; 115V/60Hz; |
Power Consumption(Aver) | 1700W | 1800W | 2000W |
Mains Fuses | F 15A |
Noise Level | 50 dB(A) |
Test Programmers | Helix/BD Test; Vacuum Test; |
Working Temperature | 121℃-134℃ |
Pre-Heating Time(From cold) | Approx 20 mins |
Net /Gross Weight | 39KG/45KG | 43KG/49KG | 45KG/52KG |
Chamber Dimensions | 230*360 mm | 250*380 mm | 250*380 mm |
Extenrnal Dimensions(L*D*H) | 625*425*456 mm |
Package Dimensions(L*D*H) | 755*584*532 mm |
Operating Environment | Temperature: 5℃-40℃ Relative Humidity: max 80%, Non condensing Height: max 3000 m (a.s.l.) |
Capacity of the Distilled Water Reservoir | Approx. 5.0 L (water at level MAX) |
Use tips
- Please place the sterilization on a plane place , which could adjust the height by adjusting foot pad
- Please adopt distilled water to extend the service life
- Don't block the heat removal system on the surface of sterilization
- Please put the instruments on the tray not touching one another allowing space for steam to pass through
- Please empty the used water tank frequently. Usually it need empty when the clean water in the reservoir is empty.
- Please ensure the door handle is closed tightly
- Never try to open the chamber door if and when the pressure display doesn't show "0.0"
- Please cut off the power and cool down the auto clave before maintenance
- Don't drag the machine while moving
- Power connection must be grounded properly
- Must be provided enough power. (23L:2300VA/18L:1800VA)
- While the outside temperature is too low, please pre-heating the machine without instruments for 30 minutes
before sterilize - Don't cut off the power to stop the machine directly. If you need stop the machine directly, please press the
"START/STOP" button for 3 seconds.
More pictures

