Lab Instrument Hot Blocks for Acid Digestion instrument

Product Introduction

YKM Graphite Digestion Block is a new generation of inorganic sample pretreatment equipment. It has the advantages of strong sample processing capacity, rapid heating, intelligent program control, complete digestion, and temperature balance. In addition, the graphite digestion block has obvious energy-saving effects, and the amount of acid used for digestion is greatly reduced compared with traditional methods, which greatly reduces the pollution in the digestion process. At the same time, it can also be used for pretreatment of microwave digestion and acid treatment. It is an ideal accessory product for atomic absorption, atomic fluorescence, ICP-AES and other analytical instruments.

Applications

1. Environmental analysis field

2. Food and Drug Field

3. Mineral analysis field

Technical Parameters

Product Features

1. High-efficiency digestion capabilities and large sample processing capacity., processing up to 60 samples at the same time.
2. Accurate temperature control and uniform digestion. The product is heated by high-purity ultra-fine graphite heating module, which has good digestion consistency and repeatability. The temperature tolerance between holes is ≤±1.5℃. High-performance intelligent PID controller multi- level temperature rise and fall programming, fast heating speed, control High temperature accuracy.
3. Digestion intelligent program control, Digital display intelligent program temperature control, realize 16-segment program heating and control the heating holding time, and automatically stop heating after the heating program is completed. It can prevent the overflow of bubbles due to excessively high temperature of the boiling samples, and at the same time avoid the unnecessary loss of acid due to the boiling point of the acid solution at too high temperature, which not only shortens the digestion time but also saves acid and reduces environmental pollution.
4. Unique design anti-corrosion and durable, The upper and lower split design, the controller and the digestion unit are separated to protect the electronic components from corrosion; the double-layer heat insulation design between the heating part and the control part effectively protects the control part from high temperature damage, thereby prolonging the service life of the instrument, and the work surface is adopted sprayed Teflon which is anti-corrosion