Transformer SFRA Sweep Frequency Response Analyzer
I. Introduction:
Our company has designed the frequency response analyzer, which can accurately draw the frequency response curve. By measuring the horizontal and vertical contrast of the curve, the deformation of the transformer can be detected accurately.
Features:
1. Using the advanced technical of DDS;
2. Using the high speed and advanced microprocessor to design;
3. Using double channels of AD chip of 16 bits;
4. With seven inch LCD touch screen of which the brightness can be adjusted;
5. With thermal printer of which the print thick can be adjusted;
6. It could store 40 groups of data, which could be read to current screen or upload to the PC;
7. With PC software using which we could upload data ,test, analyze data, print data, or create word document;
8. Using USB2.0 to connect to the device;
9. Tester dimension:31cm X 15cm X 15cm;
10. Weight:4.0KG;
11. The tester is conformed to the standard of DL/T911 2016 and can be used for IEC60076-18:2012.
II. Specifications:
Two different sweep modes: Linear sweep, Section sweep | |
Linear sweep | 10HZ-1MHZ interval 0.5KHZ 2001 dots (conform to DL/T911 2016) |
Section sweep | 10HZ-20HZ interval 1HZ 11 dots |
Section sweep | 20HZ-100HZ interval 2HZ 40 dots |
Test range | (-100dB) - (+20dB) |
Test accuracy | (-40dB) - (+20dB)0.2dB |
Frequency accuracy | <0.01% |
Signal input impedance | >1M Ω(Connected according to DL/T911 2016) |
Signal output impedance | 50 Ω |
In-phase test repetition rate | 99.5% |
Picture of SFRA-II Sweep Frequency Response Analyzer,which adopts Frequency Response Method and Impedance Method