Bicycle Comprehensive Performance Test Machine
Introduction
Attach a certain load to the car, fix it on the machine, start the machine, make the car run at a certain speed, and pass a certain obstacle. After a period of time, inspect the car knot for damage or separation.
Scope of application
This machine mainly simulates the actual situation of the use of electric bicycles. Place the finished vehicle tester on the platform, adjust the safety device according to the standard configuration and fixed weight, and set the relevant parameters on the computer before testing.
According to the standard
En15194, GB17761 ISO4210
Technical parameter
Conveyor speed | 1.4±0.1m/sec (5km/h3.6km/h) is adjustable |
Weight | according to the CNS impact block production method |
Carrying load | ≦ 80kg (using superimposed way) |
Power | AC dual-frequency drive (3HP) |
Speed | 0-25km / hr adjustable |
The impact block | height 25mm width 50mm (can be customized according to requirements) 45 ° chamfer |
Detection | Using Korean charging sensor, it can detect bicycle damage and stop in the first time |
Machine size | (L × W × H) 250 × 150 × 280cm |
Weight | 600kg |
Applicable models | city car, mountain bike, baby carriage, co-train |
Bear the wheel diameter | 760mm (or specified) |
Test items
1. Simulated human body weight test, loaded with weights, loading parts including handlebars, seat, five-way, rear, etc.
2. Simulated riding road condition test can be screen test obstacle test separately
3. Can measure the crank power of different speeds of bicycle
4. Brake test can automatically adjust the brake force test bicycle dry state and wet brake distance
5. Electric vehicle power test set cruising range test
6. The drum distance is adjustable for different models
7. Automatically generate test reports using computer control
8. Climbing performance test