ISO 12945-2 ASTM D4966 Martindale Abrasion And Pilling Tester With 4 Test Stations
Product Introduction
This machine is suitable for testing woven fabrics, knitted fabrics, pile fabrics with a height of 2mm or less, non-woven fabrics, coated fabrics (ie, woven fabrics and knitted fabrics, and the coated parts are formed on the fabric surface). The abrasion resistance of the continuous film (sample damage, mass loss, appearance change), pilling performance.
Principle
Under the specified pressure, the circular specimen is rubbed with the same fabric or wool fabric abrasive fabric for a certain number of times with the Lissajous pattern trajectory, and the wear resistance and the pilling performance of the specimen are examined.
According to the standard
This tester is manufactured according to ISO 12947-1~3, ISO 12945-2, GB/T 21196.1~4, ASTM D4966 and other standards.
Instrument specifications
Project | Specification |
Test station | 4 stations |
Wear resistance stroke | 60.5±0.5mm |
Pilling stroke | 24±0.5mm |
Test speed | External wheel: 47.5±2.5r/min, inner wheel: 44.5±2.4r/min |
Test pressure Wear resistance | 595 ± 7g / 795 ± 7g, hair ball: 415 ± 2g |
Flattening weight | 2.5±0.5kg, diameter 120±10mm |
Controller | PLC touch screen control |
Volume (WxDxH) | 48x50x36cm |
Weight (approx.) | ≈50Kg |
Power supply | 1∮ AC 220V 3A |
Martindale Abrasion And Pilling Tester.pdf
What is Martindale abrasion and pilling tester?
Martindale Abrasion & Pilling Tester determines the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abrasives at low pressures and in continuously changing directions. The amount of abrasion or pilling is compared against standard parameters.