Constant Programmable 800L Temperature and Humidity Testing Chamber
Product introduction
800 L Programmable Temperature & Humidity Chamber is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, suitable for quality control of the industries of electron, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
Technical Data
Power Supply | 220V / 380V, 50Hz / 60Hz, Specified in order | |||||
Temperature Control Mode | Balance Temperature Control(BTC) Mode | |||||
Working Environment Temperature | 5°C ~ 35°C | |||||
Temperature Range | Temp Range from -70°C to 150°C is available on request | |||||
Humidity Range | 20% to 98% RH +/- 0.5% (5 ~ 15% is available on request) | |||||
Heating rate | 4.0 °C / min | |||||
Cooling rate | 1.2 °C / min | |||||
Shell material | Quality SUS304 stainless steel | |||||
Interior material | Quality SUS304 stainless steel | |||||
Thermal Insulation Material | Polyurethane foam (glass wool) | |||||
Controller | Siemens or HT-900 Korea | |||||
Refrigerating Unit | Tecumseh, France made | |||||
Cooling Mode | Water cooling / Double segment compressor | |||||
Heater | Ni-Cr heating wire | |||||
Blower | Centrifugal blower | |||||
Temperature Sensor | PT100 | |||||
Safety Devices | Power overload, leakage, grounding, over-temperature protection (with voice prompts), fast fuse, compressor over-voltage protection | |||||
Optional Parts | printer, special port, added shelf, special shelf, PL internal bulbs, dry and wet ball gauze, etc. | |||||
Internal Dimensions (W x D x H cm) | 40 x 40 x 50 | 50 x 50 x 60 | 60 x 50 x 75 | 80 x 60 x 85 | 100 x 80 x 100 | 100 x 100 x 100 |
Internal Volume (L) | 80 | 150 | 225 | 408 | 800 | 1000 |
External Dimensions ( W x D x H cm) | 90 x 94 x 136 | 100 x 104 x 146 | 100 x 117 x 161 | 110 x 137 x 171 | 150 x 137 x 186 | 150 x 157 x 186 |
Weight (Kg) | 180 | 250 | 300 | 400 | 520 | 550 |
Application industry (not limited to the following)
1. Electronic, electrical, mobile, data
2. Communication, instrumentation, vehicle parts
3. Plastic products, metal, food
4. Chemistry, building materials, medical treatment
5. Space and other products to detect the quality of use
Working room is made of SUS#304 stainless steel material