MachineU > China Products > Construction & Real Estate > Fireproofing Materials > Other Fireproofing Materials
BS476-6 Building Materials Fire Propagation Index Tester
BS476-6 Building Materials Fire Propagation Index Tester
BS476-6 Building Materials Fire Propagation Index Tester
BS476-6 Building Materials Fire Propagation Index Tester
BS476-6 Building Materials Fire Propagation Index Tester
BS476-6 Building Materials Fire Propagation Index Tester
Specifications
Brand Name :
SKYLINE
Model Number :
SL808
Certification :
CE
Place of Origin :
CHINA
MOQ :
1 unit
Price :
negotiated
Payment Terms :
T/T, Western Union, MoneyGram
Supply Ability :
1 unit/ month
Delivery Time :
20 working days
Packaging Details :
plywood case
SKYLINE :
Fire Propagation Index Tester
Standard: :
BS 476-6
Ambient Temperature :
Operating 10°C to 35°C
Pressure :
1kPa
Dimensions :
400mm (W) x 600mm x (H) x 300mm (D)
Weight :
50kg
Description

Fire Propagation Index Tester with Stainless Steel Support Frame and Calcium Silicate Board Combustion Chamber

Product introduction

BS 476 part 6 specifies a method of test, the result being expressed as a fire propagation index, that provides a comparative measure of the contribution to the growth of fire made by an essentially flat material, composite or assembly. It is primarily intended for the assessment of the performance of internal wall and ceiling linings.​

Technical parameters

1. Stainless steel box support frame;
2. Calcium silicate board combustion chamber;
3. Three sample holders, stainless steel package;
4. 2 1000W quartz radiator devices provide thermal radiation to the sample;
5. T-type burner, providing open flame combustion mode for the sample;
6. The thermocouple continuously records the difference between the temperature and the room temperature in the chimney;
7. The power output is automatically controlled, and the output power is automatically adjusted according to the test time;
8. The computer automatically processes the data, and can print test reports.

Product Features

1. Three kinds of sample holders for different thickness of the specimens.
2. Low reflective black finished mild steel Chimney and Cowl assembly complete with thermocouple mounting points.
3. Compliant stainless steel gas burner.
4. Two K type mineral insulated thermocouples complete with ceramic insulators.
5. Two pencil type heaters with 1000w installed in combustion chamber.
6. Control gas instrumentation including electronic gas on/off valve, flow regulating valve, flow meter and manometer.
7. Intelligent single phase power controller with feedback loop for accurate control of electric heating elements
8. DAQ record automatically the mV output from the thermocouples of the flue gases throughout the duration of the test.
9. According to the test time, automatically adjust the output power.

Application: It is mainly used to evaluate the fire performance of wall and ceiling linings.

Product Details

The BS 476-6 test method is a method for determining the flame propagation properties of materials. It is mainly used to evaluate the fire performance of wall and ceiling linings. The results are expressed in terms of flame propagation index. During the test, the test piece was exposed to a tube torch, and the heat release of the lamp was 530 J/m. After 2 minutes and 45 seconds of the test, the total power of the two electric heaters was adjusted to 1800 watts. When the test was performed for 5 minutes, the power was reduced to 1500 watts, and then the power was maintained until the end of the test. The total test time was 20 minute.

Data Acquisition system

Prompted software interface
Data recording and display of cowl temperature against time
Data recording and display of ambient temperature against time
Display of power value in kW
Calibration procedure
Calculation of output rise and calibration value
Standard:BS:BS 476-6
Dimension :
Dimensions: Apparatus: 400mm (W) x 600mm x (H) x 300mm (D)
Control module: 400mm (W) x 500mm x (H) x 400mm (D)
Weight:46kg

Installation requirements

Electrical: 230 volts Nominal 10 Amps
Ambient Temperature: Operating 10°C to 35°C
Gas Supplies: The gas supply specified in the Standard is Standard test gas G112, as specified in BS 4947.
Flow: Gas flow for burner adjustable from 0 to 5 nl/min
Pressure: 1kPa

Fire Propagation Index Tester.pdf

Product tags

building material fire tester

,

efx ground metal detector

,

ground efx metal detector
Send your message to this supplier
Send Now

BS476-6 Building Materials Fire Propagation Index Tester

Ask Latest Price
Product Detail
Brand Name :
SKYLINE
Model Number :
SL808
Certification :
CE
Place of Origin :
CHINA
MOQ :
1 unit
Price :
negotiated
Contact Supplier
BS476-6 Building Materials Fire Propagation Index Tester
BS476-6 Building Materials Fire Propagation Index Tester
BS476-6 Building Materials Fire Propagation Index Tester

SKYLINE INSTRUMENTS CO.,LTD

Verified Supplier
8 Years
guangdong, dongguan
Since 2011
Business Type :
Manufacturer, Distributor/Wholesaler, Importer, Exporter, Seller
Main Products :
Lab Testing Equipment, Flammability Testing Equipment, Fire Testing Equipment
Total Annual :
120000-350000
Employee Number :
100~107
Certification Level :
Verified Supplier
Discover similar products
View More
Watch related videos

Find Similar Products By Category:

Supplier Homepage Products Building Materials Flammability Tester
MachineU China Products Construction & Real Estate Fireproofing Materials Other Fireproofing Materials
Contact Supplier
Submit Requirement