Simulate the damage of natural water (rain, seawater, river water, etc.) to products and materials, and waterproof testing of product casings.

Application: For electrical products, outdoor lamps, electrical cabinets, electrical components, automobiles, motorcycles and their components and other products in simulated rainy climate conditions, the physical and other related properties of the product tested. After testing, the performance of the product is determined to meet the requirements, in order to facilitate product design, improvement, verification and factory inspection use.

Standard :
IEC60529:2013,
GB/T4208-2017 Housing Protection Rating (IP Code) 14.2.1, 14.2.2 and Figure 3
GB7000.1 Lamps Part I: General Requirements and Trials 9.2.3
IPX1, IPX2

Features:

1. Touch screen control, independently developed operating interface (based on customer requirements to install multiple languages), can directly choose waterproof level, the device will automatically in accordance with the standard terms of the waterproof rating conditions for testing;

2. Core control components use 7-inch touch screen + Panasonic PLC, and electrical components are made using imported brands such as LS .

3. Sample loading table using stepper motor, rotation speed and standard angle can be controlled by touch screen, IPX1 standard speed: 1r/min; IPX2 angle test can be completed automatically: 2.5min rain in 4 positions.

4. With air drying function, after the completion of the test, the water in the drip tank can be removed clean, to avoid long-term water fouling and block the pinhole.

5. The rainboard automatically rises and falls , it can automatically stops when the nozzle is located at the highest point of the tested object at 200mm.

6. Rainfall: with adjustment valve, can be adjusted manually.

7. The nozzle contact bit brass cone design makes it easy to change the needle without tools, and a stainless steel mesh shield is installed under the needle to prevent the test operator from being injured when the head touches the test needle.

8. Rain-drip plate: the use of vacuum design, the use of high rust-proof stainless steel material manufacturing.

9. Equipment shelf : manufactured from high-quality aluminum profiles.

10. sample turntable: US304 stainless steel plate processing and manufacturing.

Technical parameters :

Terms of use :

Accessories:
1. Filter element: 1pcs;
2. Test needles: 100 pcs;
3. Brass drip pin holder: 20 pcs

Download files :Vertical Rain-Drip Tester-Fixed on the wall.pdf

Types of IPX Rain Spray Test Chamber

• IPX1/2 vertical drop test equipment (with rotating machine and tilt sample samples machine);--Model :WT-01/02/03
• IPX3/4 automatic arranging the pouring water test equipment (with automatic turntable);--Model : WT-04 /05
• IPX5/6 hosing test equipment (D 6.3 mm, D 12.5 mm nozzle);--Model : WT-06/07/08
• IPX7 the water immersion test equipment ;--Model : WT-09
• IPX8 Pressure Immersion Water Test equipment --Model : WT-10
• IPX7 / IPX 8 water and Pressure water immersion test equipment --Model : WT-11
• IPX9 9K High Temperature And High Pressure Water Spray Test Chamber --Model : WT-12
• IEC60529 IP5X IP6X Dust Test equipment (500L / 1000L )--Model : WT-13/14