2. Dimensions: Electric cabinet: 0.6 meters long, 0.6 meters wide, 1.75 meters high Machine: Length 0.8m × Width 0.6m × Height 1m
3. Serial port: There is a 232 serial port, which cannot output reports, and there is a database
4. Calibration frequency: The manufacturer will arrange calibration before leaving the factory. It is recommended to calibrate once a year in the later stage. Usually, the customer can calibrate it by himself, weigh it with a balance weight, and put it on the machine, and the display is as much as it is.
5. Air inlet trachea diameter: 6mm in diameter
Dynamic Balancing Machine Quality standard:
1. Supplier product manufacturing standard GB/T4201-2006.
2. The supplier's product manufacturing requirements are also in accordance with the technical agreement signed by both parties. Warranty period: The "Three Guarantees" period of the supplier's products is one year, with lifetime maintenance.
Dynamic Balancing Machine Acceptance:
1. At the supplier, the equipment is subject to factory inspection, and the rotor is checked and verified.
2. At the buyer's place, conduct on-site acceptance of the equipment, conduct practical operations on physical workpieces, and complete the training that should be known and known.
Dynamic Balancing Machine After-sale service:
1. The supplier is responsible for the pre-ex-factory training services for the equipment ordered by the buyer, such as operation, balance calculation, and common troubleshooting.
2. The supplier is responsible for the operation training service for the operator of the purchaser at the purchaser.
3. Once the equipment fails, the company will respond to the support in the fastest way after receiving the notification from the user, and the arrival time will not exceed 24 hours to carry out maintenance work.
4. The supplier is responsible for the free service of the equipment during the "Three Guarantees" period, and is responsible for the lifetime maintenance service and spare parts supply service after the "Three Guarantees".
Dynamic Balancing Machine Specification
