1-8mm Thickness Effervescent Tablets Rotary Tablet Press Pharmaceutical Tablet Press Machine

Technical Specifications

Applications:

1. This machine is a tablet pressing machine with continuous pressure and automatic feeding. It has high output and good reliability. Mainly used in the pharmaceutical industry, it can also be used in food, chemical and other industrial sectors. It is a basic equipment for processing various granular raw materials and processing them into tablets.
2. It is suitable for mass production and pressing of various round, special-shaped or ring-shaped tablets, sugar tablets or calcium tablets.
3. It is not suitable for pressing semi-solid, moist powder and non-granular extremely fine powder.

Product show

Descriptions: This machine is used to press the granular raw material into the round tablets or various geometric shaped tablets, it is especially caters for small scale production. When pressing the tablets, the rotary disc speed and filling depth of material can be adjustable.
In addition, it is equipped with the force-feeder and overload protection devices. So This machine is also suitable for viscous materials.

Product Advantage

Product Details

- The material of the cover and internal table are made of stainless steel.The housing is fully closed. The surface of turntable is specially disposed to keep the surface luster and prevent it from being polluted.This series conform to GMP standard governing the medicine production and quality control. The tablet-paint.
- Equipped a force-feeder on this machine.
- The lay-out of all the controllers and the operate parts is reasonable.
- All the drive devices are located inside the machine so keep the machine clean.
- Overload protection unit is included in the system to avid the damage of the punches and apparatus, When overload occurs, the machine will stop working automatically.
- This machine also has electromagnetic brake motor and other safety protection device which can be adjusted and operated when running.

Matters needing attention

1.Raw materials that are not dry should not be used because they will cause the powder to stick to the punch.
2. If there is a jump or stagnation during operation, do not remove it with your hands to avoid injury to your hands.
3. The pressure should not be too high during use. It is generally measured by the motor load. It is normal if it does not exceed the motor's rated current of 4A.

Packing & Shipping