liposuction lipo laser cryolipolysis fat reduction machine vacuum slimming
Working Theory:
Cryolipolysis is based on the scientific principle that fat cells are more sensitive to coldness than the overlying skin and surrounding
tissues. It utilizes technology of precisely controlled cooling to reduce the temperature of fat cells in the treated area, which is intende
to cause fat cell elimination through a natural biological process known as apoptosis.
Once cooled, the fat cells then undergo apoptosis, when apoptosis happens, the fat cell wall breaks down causing lipids(fats) from the cells to be released. These lipids are transported by your lymphatic drainage system to be processed and eliminated through the body. This process is very gradual, meaning that there is no danger of your lymphatic system being over loaded.
Application:
Stubborn fat reduction | Cellulite reduction |
Body contouring | Skin elasticity enhancing |
Technical Specifications:
Input voltage | AC110V/220V 50-60Hz |
Power consumption | < 500w |
Screen | 10-inch wide color touch screen |
Cooling device output temperature | -9-45 |
Cooling device output pressure | 0-100KPa |
Cooling liquid | pure water |
Default time | 0-120min |
Fuse size | F2AL250V |
Ambient temperature | 5 -+40 |
Relative humidity | 80% |
Atmospheric pressure | 80KPa-106KPa |
Model | Size | |
Cryolipolysis treatment handle | Size 100 | 90*43*65mm |
Size 150 | 130*50*65mm | |
Size 200 | 190*70*92mm | |
Antifreeze membrane | CRYOⅠ | 280*280mm |
CRYOⅡ | 270*300mm | |
CRYO Ⅲ | 340*420mm |
Machine Details:
Q: Have other handle for this machine? A: For this machine, we have 100, 150 and 200 size for your choosing.
Q: What is the lowest temperature of this device?
A: It can reach -9 degrees.
Q: Well per treatment how long is the duration to do it again?
A: For the same area, need 1 month to treat second time. Treat the adjacent to distant sites, about need one week to treat the second time.
Q: It has better results In treatment: when the area after treatment is red and raised or treatment can have good results without the part that blush?
A: If the treatment part not has blush, means the vacuum pressure is low, didn't reach the requirement for treatment.
When the area after treatment is red and raised, this will has better results.
This is the normal reaction after treatment, the red will fade away gradually within about one week.