Single bearing full stroke main laser chuck for laser tube cutting machine-- partner of Hans Laser/HSG/LONGXIN/JT laser

A. Specially design for laser tube cutting machine;

B. Can be used as an independent rotating spindle,chuck in it can firmly clamp workpiece and rotate simutaneously;

C. Quick clamping and loosening can be realized by side rotation and air intake;

D. Motor+gear+laser chuck+compressed air source(0.2-0.9Mpa)=Work!

Advantage:

1. Base point positioning-convenient for adjustment of main equipment and greatly shortens the debugging time of the main equipment;

2. Claw release test-greatly improves the reliability of chuck safe operation;

3. Full stroke design-No need to adjust the claw,easy clamping and centering,to achieve switching among different pipe diameter,which greatly saving clamping time.large clamping force ,wide calmping range,long holding time(more than 8 hours),stable performance;

4. Wide range of application---different material,different diameters,such as:round tube,square tube,rectangular pipe,O-pipe,triangular pipe,H-beam and channel steel etc.

5. High repetitive positioning accuracy--high accuracy;

6. Low maintenance cost,long service life--All sliding parts are hardened and have good wear resistance;good sealing design for guide goove of the sliding part claw which improve the dust-proof performance; adequate lubrication design sliding parts;dynamic balance detection;

7. Multiple configurations available--solid or hollow/Comb-type/mortise-goove type claws/keyway extension claw or roller claw/2-claw/3-claw/4-claw/6-claw or abnormal claw;

8. 3D design for accurate,fast and effecient design;

9. Structual finite element analysis for strength check,deformation,strain,stiffness caculation of parts at different direction--to assure parts fully meet the design request under different loading and restraint conditions