Treatment Handles
1) Handle One:Big size vacuum rf roller(5M RF+ 3 LED Light +Vauum+rollers)
Four models working way of the large mechanical rollers:
1. dual rollers rotate inwardly
2. dual rollers rotate outwardly
3. dual rollers rotate clockwise simultaneously
4. dual rollers rotate anticlockwise simultaneously
Applications:
1. Bi-polar RF: 5MHZ RF penetrates the skin depth with 5-15mm. It focuses on heating the fat cells and treats cellulite intensively.
2. LED Light: Red light(650nm), Blue light (480nm) and Green light (560nm)can increase skin elasticity and smooth the concave and convex surface.
3. Vacuum: The vacuum can increase blood circulation and promote cell metabolism.
4. Rollers: The rollers have strengthened the RF and the thermal penetration depth so as to reach the fat layer more effectively.
2) Handle TWO: Medium size vacuum rf roller(5M RF+ Red Light +Vauum+rollers)
Two models working way of the small mechanical rollers:
1. dual rollers rotate clockwise simultaneously
2. dual rollers rotate anticlockwise simultaneously
Vacuum models:
1. Model A: long suction mode
2. Model B: inhale 0.5 seconds and deflate 0.5 seconds
If you use the discontinuous vacuum model, the patients will be more comfortable same like massage machines, So we also call it cellulite massage machine. But if you want more good results, long continuous vacuum scution will be a better choice.Push all the fats to the near lymph nodes to reduce it.
Can it really make 1.5 inch loss each time?
It is really good at body shaping and slimming. The result get 100% satisfation degree. Usually, you can se very good result on the first treatment. But for some people/ treatment area with muscle-type cellulite and hard fat tissue. You may see result later on the second or the third treatment.
Treatment courses:
For Body, Arm& Leg: 30~45mins/ time, 10 times for a full course treatment.
For Face: 20~30 minutes/ time, 10times for a full course treatment
Technical Parameters:
Power consumption | 800W |
Fuse size | 220V 5A /110V 10A |
Big Applicator | |
Vacuum pressure | 0-95KPA |
Roller speed | 40 RPM |
RF energy | 60W |
RF frequency | 5M |
LED light wavelength | 650nm, 480nm, 560nm |
Middle Applicator | |
Vacuum pressure | 0-95KPA |
Roller speed | 40RPM |
RF energy | 60W |
RF frequency | 5M |
LED light wavelength | 650nm |
Small Applicator | |
Vacuum pressure | 0-95KPA |
RF energy | 30W |
RF frequency | 5M |
Work area | 18.5X6mm |
40K Applicator | |
Cavitation frequency | 35-40KHz |