500W Handheld Rust Cleaning Machine For The Oxide On Electronics Component Pins

Oxide and Contaminant Removal :

Oxide layers absorb laser light particularly well and thus can be removed very effectively. Oxides are instantly vaporized from ferrous and non-ferrous metals to expose a clean oxide-free surface.

After laser cleaning, and before exposure to atmospheric oxygen and humidity, the surface is active and absolutely free of contamination.
The laser cleaning / de-coating process has been proven to remove and / or significantly reduce fixed radiological surface contaminants without creating secondary waste.

Benefits :

1 . Creates oxide-free metal surfaces

2 . Eliminates need for grinding / sanding / grit blasting

3 . High cleaning rates

4 . Along with oxides, laser process removes other surface contaminates such as oil, grease, chlorides, release agents, etc.

Laser rust removal technology compared with the traditional way of rust, has the following characteristics :

1 . No physical damage to the workpiece, since there is no direct physical contact during the laser rust removal process;

2 . Laser direction is good, the rust parts can be accurately positioned, not subject to surface morphology constraints;

3 . Easy to use and flexible, simple operation, you can remote control;

4 . Laser degreasing cleanliness, in the removal of corrosion at the same time will make the base material surface changes, can effectively slow down the re-oxidation;

5 . Can accurately control the rust process, to achieve the required rust effect;

6 . In the cleaning process only consumption of electricity, rust costs lower.

Technical Parameters for Laser Cleaning Rust Removal Machine

Guarantee and after-sales service :

1 . Two years for laser source,two years for all other parts.

(the focus lens and reflector lens is Vulnerable goods not including the Warranty Policy)

2 . 24 hours technical support by email or calling.

3 . Free training for installation and operation.