Red Light Therapy Fat 5D Lipo Pad Laser Slimming 5 Wavelength 650nm 980nm 808nm Infrared Body Sculpting Machine
1. How Does Lipo Laser Work? (principle)
Treatment principle:Laser energy to burn fat, the target tissue absorb certain wavelengths of light, promote blood circulation, Cellulite fat soluble,so as to achieve the effect of safe, non-invasive, high efficient body sculpting plastic surgery.
Lipo Laser paddles containing laser diodes that emit specific wavelengths of light designed to target fat cells are placed on the patient’s skin for 15~20 minutes per treatment area. Laser energy safely and painlessly penetrates several millimeters into the subcutaneous adipose or fat tissue layer. The adipose cell walls are made permeable for a temporary period allowing cell contents to spill out into the interstital space. The fat (in the form of triglycerides) is converted to free fatty acids, water and glycerol.
Lipo Laser is a 100% non-invasive way to achieve inch loss and body contouring with no pain, no needles and no down time. 650nm
enhances metabolism, 940nm go deep into the skin, the three wavelengths collaborate harmoniously to lose weight efficiently. Lipo Laser emits low levels of laser energy, which creates a chemical signal in the fat cells to break down the stored triglycerides into free fatty acids and glycerol, and finally releasing them though cell membranes channels.





Application:
1. Fat removal, decrease cellulite, weight loss and inch loss
2. Promote and accelerate the body's metabolism
3. Skin tightening
4. Detoxification
5. Reduce fatigue
6. Decrease appearance of stretch marks
7. Feel better inside and out
8. Most importantly, non invasive short treatment process
Specification:
Wavelength | Laser diode 650nm & 780nm & 808nm & 940nm & 980nm |
Output Energy | 209mw each diode laser light |
Energy Lever | 1-15 |
Pulse Time | 0.1-5s |
Delay Time | 0-5s |
Treatment Time | 1-60mins |
Number of treatment paddles | 6,8,10,12,14 16 option |
Number of diode laser | 4,28 each paddles option |
Cooling system | Air cooling +wind cooling |
Mode of Operation | Continues/time setting |
Safety | On Board Diagnostics |
Classification | Electrical Class I, Type B applied part |
Dimensions | 52*40*30cm |
Net Weight/Volume Weight | 11kg/32KG |
Main Power output | 220v or 110v/50Hz-60Hz |
Environmental Requirement | 50°F to 86°F Non-condensing Humidities Below 75%RH |
Company:
