High performance MNK-2560 Saddle type CNC Surface Grinding Machine

I. Overall layout of the equipment

1. Saddle type machine tool

2. The grinding wheel cooling of the grinding wheel rack is independent by the cooling system, there is a coolant nozzle on each grinding wheel, the coolant flow of each grinding wheel is not less than 100 l/min. An independent cooling water tank is provided at one end of the equipment.

3. At one end of the machine bed, there is an independent lubricating control tank, which can continuously moisten the guide rail of the working table.

The main mechanical structure characteristics of the machine tool

1. The main structure part is made of gray cast iron HT250 which has good strength, wear resistance and heat resistance and good vibration reduction performance. Internal reasonable layout, enhance the rigidity;

2. The machine is used for plane grinding, using middle master electromagnetic chuck clamping;

3. The grinding head of the machine tool adopts horizontal structure.

4. Left and right (X-axis) adopts C3 large lead ball screw and roller linear guide rail directly connected structure, the servo motor drives the left and right fast and steady reciprocating motion,with 3232 large lead screw transmission speed, high repeated positioning;

5. Front and rear (Y axis) adopts C3 class ball screw and P class roller linear guide rail connected structure, driven by servo motor ball screw through linear guideways to make stable reciprocating motions before and after;

6. The spindle adopts PF120 powerful spindle frequency converter to control the spindle motor running at constant line speed.

7. Adopt the New Generation system or Siemens control system, 10 inch LCD display, and equipped with handheld control unit; The machine adopts diamond pen to automatically dress grinding wheel. Grinding wheel automatic dressing and compensation function to maintain the consistency of grinding size;

8. The upper and lower (Z axis) adopts C3 level ball screw and hard guide rail directly connected structure, driven by servo motor, with high rigidity and repetition accurate positioning and other advantages;

9. The outer cover of the machine tool adopts non-calibration billing door opening structure. A maintenance window is opened on the right side to facilitate the installation of the cylinder and clean the surface of the tooling. An air suction device is made above the outer cover to facilitate the installation of centralized dust pipe device to play a good dustproof effect .

10. Grinding wheel dressing is a system-controlled fixed-point dressing mode, which can improve the dressing speed of new grinding wheel.