Custom Flat Airbag FFC cable 0.7mm 1mm 1.25mm 2.54mm Pitch Flexible Flat Ribbon Cable For mazda airbag

Please provide the following parameters before purchasing:
1: P = core (count copper wire)
2: total line length (unit: mm)
3: Pitch (distance between the middle points of the two lines) Total line width (unit: mm)
4: Direction: A in the same direction (metal faces on the same side) B reverse opposite sides (metal faces on different faces) E type (one end plugs and one end welding) G type (two end welding)

Please note:

Do not touch the gold finger directly with your finger during the use of the FFC cable. This can easily cause oxidation. Before leaving the factory, we do sample pull and flexibility tests on the products. When inserting the connector terminal, the cable should be flat, and do not insert it at an angle to avoid damage to the plug end.
Q: How does the FFC flexible cable distinguish between front and back?

If the gold fingers (or blue reinforcement plate) on both ends of the cable are on the same side, it is called the same direction line (or the same line); if the gold fingers (or blue reinforcement plate) on both ends of the cable are different Faces are called reverse lines (or different lines)
Q: What tests have you done before leaving the factory?
Before leaving the factory, we performed adhesion test, flexibility test, high temperature test, high voltage low resistance test.
Q: Does your company have an SGS report?
Our products are all environmentally tested and certified by third-party agencies. Inspection report, quality guarantee all

FFC cable specifications:

1. Rated temperature: 80 ° C
2. Withstand voltage: 60V
3. Large conductor resistance at 20 ℃: 25Ω / km
4. This product has softness, acid resistance, oil resistance, moisture resistance, mildew resistance and other characteristics.
5. Rubber: PET material
6. The conductor uses tinned copper wire