High Brightness IPS 10.1 inch RGB TFT Display 1024x600 with PCAP Description
TXW100076B0-XL is a 10.1-inch RGB interface high brightness 1024 x 600 IPS TFT-LCD module with a projected capacitive touch screen (PCAP). This TFT module adopts IPS technology and has the advantages of a wide viewing angle of left: 85/right: 85/up: 85/down: 85 degrees (typical) and high brightness of 700 nits (typical value). If the customer requires higher brightness, please contact our sales staff.
Product: | 10.1" Inch TFT LCD | Resolution: | 1024x600 Dots |
---|---|---|---|
Touch Screen: | With CTP | Cover Glass Dimension: | Customizable |
Outline Dimension: | 252*150*6.5mm | Viewing Direction: | All Viewing Angles (85/85/85/85) |
Interface: | RGB | Pin Number: | 50 Pins |
Connection: | Plugging | Surface Luminance: | 700 Cd/m2(nits) |
LED Lifetime: | 30,000 Hours | Compliance: | CE FCC & RoHS Compliant |
High Brightness IPS 10.1 inch RGB TFT Display 1024x600 with PCAP Drawing
Absolute Maximum Rating
Characteristics | Symbol | Min. | Max. | Unit |
LCM Operating Temperature | TOPR | -20 | +70 | °C |
LCM Storage Temperature | TSTG | -30 | +80 | °C |
TP Operating Temperature & Humidity (20% ~ 90%RH) | TOPR | -20 | +70 | °C |
TP SStorage Temperature & Humidity (20% ~ 90%RH) | TSTG | -30 | +80 | °C |
Humidity | RH | -- | 90 | % |
TFT DC Characteristics
Characteristics | Symbol | Min. | Typ. | Max. | Unit | Note |
TFT OperationFrame rate | Hz | -- | 60 | -- | Hz | |
Supply Voltage for(DC/DC) | VDD | 3.0 | 3.3 | 3.3 | V | |
TFT Gate ON Voltage | VGH | 16.5 | 17 | 17.5 | V | Note 2 |
TFT Gate OFF Voltage | VGL | -7.5 | -7 | -6.5 | V | Note 2 |
TFT Common Voltage | Vcom | 3.0 | 3.3 | 4.7 | V | Note 1 |
AVDD | Avdd | -- | 9.6 | -- | V | Note 3 |
Note 1: VCOM value should be adjusted by different condition to optimize Flicker Value.
Note 2: VGH and VGL are the operating voltages of TFT gate.
Note 3: Adjust the contrast, make the color bigger and darker, and make the color smaller and lighter.
Module Function Description
Pin No. | Symbol | LCM Description | remarks |
1 | LEDA | POWER SUPPLY+ FOR BACKLIGHT ANODE | |
2 | LEDA | POWER SUPPLY+ FOR BACKLIGHT ANODE | |
3 | LEDK | POWER SUPPLY- FOR BACKLIGHT CATHODE | |
4 | LEDK | POWER SUPPLY- FOR BACKLIGHT CATHODE | |
5 | GND | Power ground | |
6 | VCOM | Common voltage | |
7 | DVDD | Power for Digital Circuit 3.3V | |
8 | MODE | DE/SYNC mode select. MODE=H:DE mode;MODE=L:SYNC mode | |
9 | DE | Data enable signal in RGB I/F mode 1 | |
10 | VS | Vertical sync. Signal in RGB I/F | |
11 | HS | Horizontal sync. Signal in RGB I/F | |
12 | B7 | Blue data | |
13 | B6 | Blue data | |
14 | B5 | Blue data | |
15 | B4 | Blue data | |
16 | B3 | Blue data | |
17 | B2 | Blue data | |
18 | B1 | Blue data | |
19 | B0 | Blue data | |
20 | G7 | Green data | |
21 | G6 | Green data | |
22 | G5 | Green data | |
23 | G4 | Green data | |
24 | G3 | Green data | |
25 | G2 | Green data | |
26 | G1 | Green data | |
27 | G0 | Green data | |
28 | R7 | Red data | |
29 | R6 | Red data | |
30 | R5 | Red data | |
31 | R4 | Red data | |
32 | R3 | Red data | |
33 | R2 | Red data | |
34 | R1 | Red data | |
35 | R0 | Red data | |
36 | GND | Power ground | |
37 | DCLK | Pixel clock signal in RGB I/F | |
38 | GND | Power ground | |
39 | SHLR | Source output shift horizontal direction select: ‘H’: S[1]->S[2]->…->S[1920] (Default) ‘L’: S[1920]->S[1919]->…->S[1] | |
40 | UPDN | Gate output shift vertical direction select: ‘H’: Scan Up to Down ‘L’: Scan Down to Up | |
41 | VGH | Gate ON Voltage | |
42 | VGL | Gate OFF Voltage | |
43 | AVDD | Power for Analog Circuit | |
44 | RESET | Global reser pin | |
45 | NC | No connection | |
46 | VCOM | Common Voltage | |
47 | DITHB | Dithering function. Dithering function. DITHER = H:Enable internal dithering function; | |
48 | GND | Power ground | |
49 | NC | No connection | |
50 | NC | No connection |
Product Image