Automatic Screw Feeder And Screw Tightening Machine With 2 Screwdrivers

Intro:

RS-L602 is screw driving machine with automatic feeder. It uses pneumatic pressure to feed the screws from a hopper storage to the air feed system. It has a filter plate that ensures screws of correct shape are fed. The screws from the air feed system are held on the driver tip by a chuck. The electric screwdriver can feed screws into products and tighten screws.

• Automatic screw feeding system, no need pick and place
• No need hand to hold screwdriver

Suitable:

1. For improving the efficiency of manual screw-fastening
2. For more flexible fastening
3. Feed screws easily without using hand. Our screwdrivers greatly improve screw fastening process.

Parameters:

Features:

1. The feeding system line up and distribute the screws, and send the screw to electric screwdriver through pipe

2. Operating platform. Use pedal to control electric screwdriver of up and down.

3. Electric screwdriver tightens the screw into product automatically.

4. Easy to use. Operator only needs to put product on platform by hand. And then step on foot switch. Machine will tighten screw automatically. Then take out the finished product. And repeat this operation.

5. Save time time for moving hand, fetching screws, moving screws, positioning screws, etc

6. No need to fetch screws by hand, thus won’t cause the secondary pollution of screws by stain or sweat. Screws are not easy to rust.

Advantages Comparing with traditional handheld screwdriver machine

1. No need holding screwdriver by hand. It reduces the labor intensity

2. No need positioning screw hole by hand. It saves working time better. Only need the jig to position screws.

3. Scope of application increased. RS-L601/602 desktop screwdriver machine apply to deep screw hole, big and heavy screws.

4. More favorable.