Lead Free Wave Soldering Machine for SMT Production Line

LED Production Line PCB Lead Free Mini Wave Soldering Machine RF-3S​

Features of wave solder Equipment RF-3S

01. High temperature
The machine is easy to malfunction in the high temperature environment,thus affects the production. Manufacturers do not know the cause of thecase that is mechanical damage, only normal use, attention to maintenance and micro-repair, these mechanical failure control.

02. Voltage problem
After-sales service manufacturers often encounter customer response tomechanical failure, such as mechanical heating can not work, unable torotate control display instability. The causes of the above failures, in addition to a few poor quality, most of the voltage is not enough, capacityis not enough, line aging and lead to imbalance between circuits. If it isnot repaired in time, the machine will burn out.

03. Professional maintenance
Equipment professional electrical maintenance personnel, regular maintenance and repair of machinery. Can also be under the guidanceof manufacturers to do a good job in the daily maintenance and regularmaintenance of machinery.

Specification of wave solder Equipment RF-3S

Product Packing

RFQ of Mini Wave Welding Machine RF-3S

1. What is standard temperature setting for wave solder machine?

Leaded soldering: Preheating1: 100℃ / Preheating2: 110℃ / Preheating3: 120℃ / Solder pot: 245℃

Lead-free soldering: Preheating1: 100℃ / Preheating2: 110℃ / Preheating3: 120℃ / Solder pot: 265℃

2. How are can make maintenance for wave solder machine?

Everyday: Cleaning the sundries in the pre-heating zone and solder pot, and check deviation between setting temperature and the real-time temperature (once every hour) ; Inspect tin surface altitude, at circumstance do not turn on the wave crest, the normal tin’s height should be kept 3-5 mms apart from the solder-pool;

Every week: Periodically cleaning of heating parts, clean out the oxide in the spray nozzle;

Every three months: Check electric circuit and electric wire