Flat fixed joint light weigth metal connector lean tube bracket

Product introduction

The pipe clamp flat fixed metal joint only need one pair of M6 * 25 bolts to complete the installation process.The fixed plane plane connector needs to be assembled with W-15B to form a set of plane fixed connectors.The surface of flat fixed joint can be provided with holes to further drive self-tapping screws to strengthen the fixation of the pipe and the joint. After the joint is grinded, the burr on the joint surface can be greatly reduced or even completely cleared, effectively reducing the risk of injury to workers in the workplace. And the surface treatment of the joint adopts electroplating, which can effectively prevent its rusting and prolong the service life of the joint.

Features

1. Two equipotential lines on both sides of the product, so the installation position of the tube can be known when using. Auxiliary user installation.

2.The thickness of the product is up to 2.5, 25% thicker than most products, with stronger performance and higher bearing capacity.

3. Holes are reserved on the surface of the product, and self-tapping screws can be inserted later to better fix the pipe.

4. Products can be customized with logos and marked with models according to different needs of customers.

Application

The use of right angle external corner joint is very simple. Only two pairs of M6 * 25 screw and nut are required to connect the three lean pipes. The connection may form a 90 degree structure at the edge of the tube. You can even build a workbench only use Combination of internal and external corner joints, T-type direct joints and lean pipes. Moreover, the connection between the connector and the lean pipe conforms to human mechanics. Only one M6 hexagonal wrench can complete the installation process. External corner joint is often used in various material racks and turnover vehicles. It is the most commonly used joint in the lean pipe system.