Project for VODKA bottle case with scrolling message

LED message bottle support custom messages up to 255 characters each on its LED strip, and you can choose the color pink or blue. Here's how it works:

1. Press the On/Off button

2. Press the Enter button to enter programmable mode

3. Press the P-U (UP) button to select the line (1-6)

4. Press the P-U and P-D buttons to find the first character of your message and hit enter to save after each one

5. Press the On/Off button to save the setting when you see a blinking”A”

FAQ

How many different messages can I save?

You can program up to 6 different messages. Each message can contain up to 256 characters. You can scroll through these by pressing the P-U and P-D buttons when the display is turned on.

How long does the led clips run for?

After you've used the ON/OFF button to activate the display, it will run continuously for 30 minutes and then shut off to conserve power if no button is pressed.

How can I see the different messages already programmed?

P-U (Up) and P-D (Down) buttons allow you to see the different messages. Once the line you wish to keep appears, you do not need to press anything else.

I saved an incorrect character. Can I delete/edit or do I have to start my message over?

Deleting and editing are not currently possible. You will have to start your message over.

I entered the programming mode, but decided I don't want to change my

message.

How do I go back to display mode?

If you want to stop programming while selecting the message number, press the P-D button to exit. To exit the character selection mode, press "ON/OFF". Never leave the display on in the programming mode.

How long does the battery last?

The battery can last for over 20hours.