NS-SZ100RGB-3CH-LV is a capable of multiple zones unified controlling products. The system consists of two parts, the RF remote control and receiver components, to achieve integrated control of multiple areas within the effective distance range, to meet the growing demands of LED lighting environmental control from the market. Applications such as: RGB LED strips, LED modules, LED string lights and other RGB constant voltage type LED lamps.
Adopted RF touch 18-key remote control, to achieve independent control of up to 10 areas, including switching, pause, adjust mode, and speed adjustment and brightness adjustment. The receiver section compatible with the HOION RGB signal amplifier for power expansion, to achieve more control of LED lights, in theory, numerous RGB amplifiers can be connected.

Product Features
●Used for constant voltage RGB LED lamps, working voltage DC12-24V.
●Multiple-zone unified control, achieve independent zone control up to 10 zones.
●User-friendly designing with Full-color touch wheel for color selection and clear function key area.
●Adopt RF remote control technology, as RF signal sender, RF frequency: 2.4GHz.
●Sleep-wakeup design, for energy conservation.
●Transmission Distance:up to 30m,no need line-of-sight.

Technical Parameters

Receiver, model for separately purchase: HX-SZ100-MULTZ-RGB.

RF remote control, model for separately purchase: HX-MULTZ-RCRGB.

Interface Specifications
Power and Payload interface:

Adopt male and female connector with screw.

Direction for use
Adopts RF 2.4GHz remote control, with one color ring and 18 buttons.

The function of each button as below:

23 modes as below:

Zone setting:

From 0 to 9, 10 codes for up to 10 zones, matching RF codes with all receivers before using. Matching operation as below:
1. Press and hold the "Pause" key and powering on the receiver(Or Press "Pause" key within 2 seconds after powering on the receiver), the LEDloading will output 50% brightness white. (Tip: if the output does not output 50% brightness, indicating that the code learning is not successful, need to repeat the step 1).
2. Press the "Number" key 3 times (each time should be finished within 3 seconds after the last time), the LED will change as: 25% brightness white 10% brightness whiteback to the mode before power off. It indicates the successful code learning. If not, repeat from step 1.

Typical Applications
Application Circuit: RF remote control and receiver

Application Circuit: receiver and LED loading

Product information for placing order