MachineU > China Products > Lights & Lighting > Lighting Accessories > Dimmers
T1000S Digital LED Controller
T1000S Digital LED Controller
Specifications
Place of Origin :
China
MOQ :
10
Price :
welcome to inquiry
Certification :
CE&RoHs
Description
T1000S Digital LED Controller:
1.can control 2048 pixel
2.DC5V/DC7.5V-24
3.led string, strip, pixel led
4. LEDEditor software
T1000S Digital LED Controller:
1. 256 Gray,Gamma correction processing software.
2. Support the rules and special-shaped handle.
3. Controller, a port output, may bring 1024/2048 light.
4. Off-line control, play back content stored in the SD card
5. T-1000C store a maximum of 16 documents

Video: https://www.youtube.com/watch?v=JWOI-ehVvXs

Support IC type

Module in LedEdit software

Pixel numbers

remark

LPD6803,D705,1101,6909, 6912

T-1000-6803

2048 pixel

LPD8806,LPD8809

T-1000-8806

2048 pixel

TM1803,TM1804,TM1809,TM1812

T-1000-TM

2048 pixel

TM1804 and TM1809

low speed and high speed

TM1903TM1904TM1909TM1912

T-1000-TM19

2048 pixel

UCS6909UCS6912UCS7009UCS5903

T-1000-UCS-32

2048 pixel

UCS1903UCS1909UCS1912

T-1000-UCS-256

2048 pixel

low speed and high speed

UCS3903

T-1000-UCS-1024

2048 pixel

DMX512

T-1000-DMX

170/512 pixel

Compatible DMX512

WS2801,WS2803

T-1000-WS

2048 pixel

WS2811

T-1000-WS2811

2048 pixel

low speed and high speed

DS189

T-1000-DS189

2048 pixel

TLS3001,TLS3002TLS3008

T-1000-TLS

* pixel

P9813

T-1000-P9813

2048 pixel

SM16715

T-1000-SM16715

2048 pixel

low speed and high speed

SM16716

T-1000-SM16716

2048 pixel

BS0901,BS0902

T-1000-0901

2048 pixel

BS0815

T-1000-0815

2048 pixel

Note:
Controller on the SD card can not be hot-swappable, plug the SD card every time, you must first disconnect the power supply controller

Question 1: After power, the T-1000 ERROR indicator has been flashing without display output
Answer: The ERROR indicator has been flashing means the controller did not read the card correctly, possible problems:
a .SD card is empty, with no effect file
b .The effect file in the SD card and the controller model are not match, please choose correct controller model in LedEdit and then re-create the effect file led
c .SD card did not format to FAT before copy effect files
d .Please check the supply power voltage, the controller can be individually powered to exclude power reasons
f .Changing the SD card and then test to exclude the possibility of a bad SD card

Question 2: The controller is powered on, the indicator is normal, but no effect change in lighting
Answer: The reasons for this are as follows:
A. Check if the lighting′s signal line and the controller connected correctly
B.If the TTL signal is received, the lamp and the controller must be common ground, that means connect the lighting′s and the controller′s ground together
C.check if the model chose during making display files on the SD card match the chips used in the lighting

Product tags

t1000s led controller

,

digital led controller

,

5050 led controller
Send your message to this supplier
Send Now

T1000S Digital LED Controller

Ask Latest Price
Product Detail
Place of Origin :
China
MOQ :
10
Price :
welcome to inquiry
Certification :
CE&RoHs
Contact Supplier
T1000S Digital LED Controller

NEWSTAR LED CO., LIMITED

Active Member
9 Years
guangdong, shenzhen
Main Products :
LED Strip, High efficiency LED Strip, Super Length LED Strip
Employee Number :
>less than 50
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Controller and Power Supply
MachineU China Products Lights & Lighting Lighting Accessories Dimmers
Contact Supplier
Submit Requirement