This LED Medium-intensity Type B L864 Aviation Obstruction Light flashing red color, designed for marking top of obstacle which height is more than 45meters.
Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption.
Description | Parameter |
Light Source | LED |
Flash Characteristics | 20fpm |
Operation Mode | Dusk-to-dawn Automatically as standard. |
LED Life Experience(hours) | >100,000 |
Operating Voltage | 110-240VAC, 48VDC, or others |
Power(W) | 40W |
Mounting | 190×190×θ12 |
Dimension(mm) | 229×229×168 |
Weight(kg) | 2.5 |
Ambient Temperature(℃) | -55~70 |
Humidity | 10%-95%RH(No condensation) |
Wind Speed | 240Km/h |
Waterproof | IP66 |
Options Available | Bird deterrent spike |
Compliance
ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Medium Intensity Type B Obstruction Light
FAA L-864
Features
Electrical
CREE ultra high intensity LED as light source saving power consumption and maintenance than incandescent light or halogen lamp
Power supply available in DC(12V, 24V, 48V) or AC(110-240VAC)
Physical
Unique design and UV protected polycarbonate reflector for converging light
UV protection Powder coated bright yellow color base make better visibility
System design
Built-in photocell for day/night operation(dusk to dawn operation)
Surge and lightning protection
Optional
Dry contact Alarm output for remote monitoring
User adjustable flashing rate(20, 30, 40, 60 flashes/minute)
GPS synchronization
Application
AH-MI-B2 medium-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is 45-105meter, and most time work with low intensity lights installed on the lower place.