This Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height.

Compliance

• ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Low Intensity Type A / B / E Obstacle Light

• FAA L-810

  Features

  Electrical

• 3 high power CREE LED, make sure LED keep bright while use

• Power supply in DC(48V)& AC(110-240VAC), the light could work normally when input 48VDC/110VAC/240VAC

• LED power supply board includes short circuit and open circuit protection, Line surge protection by metal oxide varistor

  Physical

• Bird deterrent spike on top

• < >nique designed PMMA lens for converging light and good transparency

  High translucency and anti-UV polycarbonate cover could use 3-5years without yellowing

• UV protection Powder coated bright yellow color base make better visibility and also long life in harsh environments

• Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection

• < >inch thread hole make pole installation easy

  No screw fix type - just twist, the cover will be fixed tightly

  System design

• Built-in photocell for day/night operation(dusk to dawn operation, automatically turn on when background luminance is below 50cd/m²

• Steady(factory setting)/20FPM/30FPM/60FPM DIP switches on PCB

• Surge and lightning protection

  Optional

• Alarm contact(NO COM NC)for remote monitoring

• Infrared LED for pilot using NVG

• GPS sync flashing

  Application

• AH-LI-B2 low-intensity light could be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the height is lower than 45m.

• When obstacle object is higher than 45m, AH-LI-B2 can be used with Medium-intensity or high-intensity obstruction light to indicate hazardous obstructions with a steady red safety light.