Heliport Inset bidirectional light is always be installed at
locations where the lights are frequently knocked down by
aircraft or maintenance vehicles.
It could be used as Center Line Light, Runway
Threshold/End Light, Runway Edge Lighting etc. The
emitting color is green/green or yellow/red or yellow/green
or red/green.
Compliance
ICAO Annex 14 Volume ǁ Heliports 5.3.
FAA AC 150/5390-2B Heliport Design Guide
Electrical
LED as light source saving power consumption and maintenance,
95% less power than equivalent incandescent light
Power supply available in AC(110-240VAC), DC48V
Physical
Pressure resistance lens allowed the vehicles go through on light
Die-casting aluminum covered by black hard anodizing layer have
good corrosion protection and load bearing
IP68 waterproof ensure light work fine underground
Emitting light in two opposite sides
Optional
Infrared LED for pilot using NVG(Night Vision Goggles)
Controller for power supplying and turn ON/OFF light
VHF pilot to ground remote control
Marine treated
Application
Helipad/Heliport Runway
Heliport Taxiway
Operating Voltage | 110-240VAC, 48VDC, 24VDC or others |
Weight(kg) | 4.5 |
Waterproof | IP68 |
Certificate
Shipment