AH-LI-B2 LED Low-intensity L810 Double Aviation Obstruction Light
Main-standby mode ensure the obstacle is always marked even one light fail.
Compliance
ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Low Intensity Type A / B /E Obstruction Light
FAA L-810
Features
Electrical
l CREE LED, make sure LED keep bright while use for long time
Physical
Bird deterrent spike on top
Unique designed PMMA lens for converging light and good transparency
High translucency and anti-UV polycarbonate cover could use 3-5years without yellowing
UV protection Powder coated bright yellow color base make better visibility and also long life in harsh environments()
System design
Steady/20FPM/30FPM/60FPM DIP switches on PCB
Main-standby mode, when the main light fail, the standby light automatically switch on to ensure the obstacle is always clearly marked.
Optional
Infrared LED for pilot using NVG
Alarm contact output (Dry contact- NO COM NC), When power failed alarm generate & also when LED fails alarm generated
Application
AH-LI-D2 low-intensity light could be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the height is lower than 45m.
Description | Parameter |
Light Source | LED |
Flash Characteristics | Steady-burning/20/30/60 adjustable |
Operation Mode | Dusk-to-dawn Automatically as standard. |
LED Life Experience(hours) | >100,000 |
Operating Voltage | 110-240VAC, 48VDC, or others |
Power(W) | 5W |
Mounting | 3/4 inch pipe thread as standard. |
Dimension(mm) | Φ90×130 |
Weight(kg) | 1.5 |
Ambient Temperature(℃) | -55~70 |
Humidity | 10%-95%RH(No condensation) |
Wind Speed | 240Km/h |
Waterproof | IP66 |
Options Available | Working mode |
Aviation lamp
Obstruction light
Aviation obstruction light
Aviation light atex
Aviation light
Low intensity faa l810
Aviation warning device
L810 faa
Wetra obstruction light
Faa l810