AH-LI-B2 Low-intensity L810 Single Aviation Obstruction Light

This Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height.

Compliance

lCAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Low Intensity Type A / B / E Obstacle Light

CAAC MH6012-2015 Aviation obstruction light, MH 5001—2013 Aerodrome technical standards

Features

Electrical

3 high power CREE LED, make sure LED keep bright while use

LED power supply board includes short circuit and open circuit protection, Line surge protection by metal oxide varistor

Physical

Bird deterrent spike on top

Unique designed PMMA lens for converging light and good transparency

3/4inch thread hole make pole installation easy

No screw fix type - just twist, the cover will be fixed tightly

System design

Built-in photocell for day/night operation(dusk to dawn operation, automatically turn on when background luminance ＜50cd/㎡

Steady(factory setting)/20FPM/30FPM/60FPM DIP switches on PCB

Surge and lightning protection

Optional

Alarm contact(NO COM NC)for remote monitoring

Infrared LED for pilot using NVG

GPS sync flashing

Application

AH-LI-B2 low-intensity light could be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the height is lower than 45m.

l When obstacle object is higher than 45m, AH-LI-B2 can be used with Medium-intensity or high-intensity obstruction light to indicate hazardous obstructions with a steady red safety light.

Aviation lamp
Telecom tower
Led low intensity warning lig
Led icao obstruction light
Aircraft warning marker
Telecom tower light
Lowintensity aviation obstruction light
Alarm output airaviation lights