EMI.90C
Please refer the installation diagram on the back of the page.
1) Remove the mirror panel from the steel base. ( See Pic.1 )
2) Place the mirror base against the wall and mark the suitable position of the screw holes
through the base on the wall ensuring the base is level. Drill the holes and put in the four wall
plugs. ( See Pic. 2 & 3)
3) Screw the mirror base to the wall with the mounting screws supplied. And ensure the base
firmly against the mounting surface. ( See Pic. 4 );
4) Put the power plug into the mains socket (120V, 60Hz) ( See Pic. 4 );
5) Hang the mirror to the steel base. ( See Pic. 5 )