18w+18w Tunable/ Dimmable CSP Led Chip 110-120lm/w for Hotel Retail Lighting CE ROHS LM-80
Product Description
Specification
Electro Optical Characteristics
Product Code
| Nominal CCT
| CRI(Ra) | Luminous Flux(lm) | Efficacy ( lm/W ) | Forward Current (mA) | Voltage (V) | ||||
Ra | R9 | |||||||||
Min. | Min. | Min. | Typ. | Typ. | Min. | Typ. | Max. | |||
XCT1814-M1207-A27/6090-E31 | 2700K | 90 | 50 | 2550 | 2600 | 115-120 | 600 | 36 | 36.5 | 37 |
6000K | 90 | 50 | 2200 | 2250 | 135-140 | 450 | 36 | 36.5 | 37 |
Absolute Maximum Ratings
Parameter | Symbol | Rating |
Forward Current | IF | 1295mA |
Reverse Current | IR | 1mA |
Operating Temperature | TOPR | -30℃ To +75℃ |
Storage Temperature | Tst | -30℃ To +75℃ |
Case Temperature | Tc | 85℃ |
Junction Temperature | TJ | 125℃ |
Soldering Temperature | TSOL | 350℃± 10℃ For 5 Seconds |
ESD Sensitivity | ESD | 2000V HBM |
Application
User Manuel
1. Storage
To avoid moisture, we recommend storage conditions for the unopened LED +5 ~ +30℃
rela-tive humidity <60%. LED should be used within 168 Hrs. of opening the package. Please
make sure to dehumidify and vacuum pack the remaining/ unused LED. Dehumidifying condition:
+120℃±5℃ of 4Hrs. Effective age for the sealed led is one year.
2. Anti-static measures
Please take adequate measures to prevent electrostatic generation, such as wearing
electrostatic ring or anti-static fingerstall etc; any relative products like plant
equipment, machinery, carrier and transpor-tation units shall be connected to discharging
unit/ ground. The ESD sensitivity of this product is > 1000V(HBM), after assembly the final
lamp, please make sure to discharge Static Electricity by proper ESD equipment.
3.Temperature control
Recommended temperature conditions for enhanced product life: Be sure to TS point (negative
pads) controlled below 85℃, COB recommendation colloid surface temperature control ≤150℃.
4. Others
Should the product be used outdoors, be sure to IP (protection class) ≥65
Product is not suitable to use in following conditions
-Direct or indirect wet / damp conditions, such as rain, etc.;
-In contact with sea water and erosive materials
-Exposed to corrosive gases (e.g., Cl2, H2S, NH3, SOx, NOx, etc.);
-Exposed to dust, liquids or oils.