2CH led power repeater for CW WW led lighting 6A/CH Max.12A

LED power repeater is suitable for all of our single color & RGB controllers to expand power output, it supports PWM control and can connect one to three times more LEDs by adding one more power repeater, and unlimited power repeaters can be connected together theoretically.

The constant voltage power repeaters and constant current power repeaters can be connected together, which is convenient for controlling LEDs with different voltage and power.

Signal input and output of LED power repeater have security protection function with photoelectricity isolation of 5KV.

Features:

1. For power repeat of synchronous changing signal.
2. Support high frequency controller output interface.
3. 2 channel WW/CW lighting control, Each channel the max current is 6A, constant voltage PWM output, the total output current is not more than 12A.
4. Cooperate with the LED controller,DMX512 decoder realizes the online control, Can realize rich change effect.
5. Accept the PWM control.
6. Match with many kinds of LED modules.
7. Theoretically we can connect limitless LED modules by connecting the repeaters in series.

Size:

Product Instructions:

Panel operation shows, the signal input and output terminals are pressing line interfaces, the output driver is altogether anode lamps.
The 4 PIN SIGNAL IN interfaces are input / output signal.

The 2 PIN POWER IN is for DC12 ~ 24 V input, 4 PIN LED OUT is for the altogether anode output with LED load.

Cautions:

1.This products Input voltage is DC12V/DC24V,other input voltage are not allowed.
2.Lead wire should be connected correctly,according to the wire color and the connecting diagram offers
3.Overload are prohibited.