6 Channel DMX controller 12-24V 6A*6CH PWM for LED fixture dipswitch addessing

Model : DE8239

SUMMARIZE:

Thank you for using DMX512 Decoder series.It adopts the advanced micro-computer control
technology, it converts the DMX-512/1990 standard digital signal adopted widely in international to the analog control signal.Output 1~6 Channels for option and each channel able to achieve 256 levels of brightness controlling,and also it can be used as the connector of PC digital-light controller and analog light modulator. It is mainly used for the controlling of buildings & lights applied LED.

Product Features:

◆Meets DMX512/1990.
◆256-levels brightness,full-color with driver controls.
◆Power without flashing, low jitter free.
◆6 output channels, single channel maximum 6 A output drive,; such as only 4 output channels, each channel can
be up to 10 A of output, total output is less than 40 A.
◆Can achieve asynchronous color changes effect under working with controller.
◆With the light color selected mechanism, and be able to control the light with 1~6 channels.
◆Setting the DMX address freely with dip-switch.
◆Modularizing and can be matched with different LED module neatly.

Product Size :

Size:L170*W65*H24mm

Weight :200g

Product instructions:

Diagram:

Note :

DMX-512 control signal connection

◆DMX signal cable with three core belt shielding line (signal special wire), DMX signal positive, negative terminal crimping, in DMX signal line plug should be paid special attention to the polarity. The input interface and corresponding signal output from the DMX512 controller,signal is negative, and the connection of DE8239 signal.

◆The DMX5000 output and DE8239 transmission line can't exceed 300 meters.

◆Most DMX5000 each port connected 85 DE8239, the JBLED FLASH light system software can realize control and computer on-line, realize unlimited expansion cascade with DMX lamp.

◆Every connected 32 DE8239 control, DMX signal must be combined with a signal amplifier (such as: RE2000), cascade cannot be more than 4PCS.