RGB LED DMX512 decoder constant voltage 12-24V for 3CH LED fixture

Model : DE8000

SUMMARIZE:

Thank you for using DMX512 Decoder series.It adopts the advanced micro-computer control technology , it converts the DMX-512/1990 standard digital signal adopted widely in international to the analog control signal.Output 1~3 Channels for option and each channel able to achieve 8bit/16bit levels of brightness , and also it can be used as the connector of PC digital-light controller and analog light modulator. It is mainly used for the controlling of buildings & lights applied LED .

Product Features:

◆Meets DMX512/1990,with RJ45 interface.

◆256-levels brightness,full-color with driver controls

◆Output 3 channels,MAX 4A per channel.Total current is 12A.

◆Can achieve asynchronous color changes effect under working with controller.

◆Cooperate with control system, can realize rich change effect.

◆Setting the DMX address freely

◆Modularizing and can be matched with different LED module neatly.

◆Custom-made.

Product Size :

Size:L160*W47*H22mm

Weight :200g

Product instructions:

Diagram:

Note :

DMX-512 control signal connection

◆ DMX signal cable is made of twisted pair ( line ) , DMX signal includes positive and negative end , in pressure welding DMX signal line plug should pay special attention to polarity . DMX512 controller output signal positive , signal negative , signal ground with DE8000 input interface corresponding connection .

◆ DMX5000 output and DE8000's transmission lines can't be over 300 meters .

◆ DMX5000 each interface can with not more than 16 pieces of DE8000. eight output interface . Through the JBLED FLASH light making software and can with computer on line control. Realize infinite contact the DMX lights .

◆ When connected 32 pieces of DE8000 , DMX signal must add a signal amplifier RE2000 . RE2000 Cascade can't more than 4 PCS.