Indoor LED Driver 12V 60W 5A Showcase Power, Signboard Light Led Transformer CE

Quick Detail:

• Constant voltage aluminum shell
• LED lighting driver 12V 60W 5A single-switch power
• AC input voltage: 90~250VAC
• 1600V High voltage test, full loading test and old aging test
• Constant voltage driver apply for LED light strip, LED module and so on
• IP20 grade
• CE, ETL approvals
• 3 Years Warranty
• Unit Size: 11.0*7.8*3.6CM & Unit Weight: 220g

Description:

Power circuit can be roughly divided "constant voltage power supply" and "constant current power supply".

Constant voltage power supply is power circuit that controls output voltage at a constant level. It always provides a constant voltage regardless of the load and is widely used as power supply for electronic circuits.

All our constant voltage drivers adopt PWM high-frequency pulse width modulation technology, mature standardized production, strict 100% load-carrying aging, high and low voltage impact experiments and complete test records for development & production of LED driver through strictly quality control system and highly responsible attitude, thus have a good quality feedback during application.

Constant voltage drivers have 5V, 12V, 24V, 36V series with 12W, 24W, 38W, 50W, 60W, 72W,100W, 120W,150W,180W, 200W,240W, 300W, 360W,400W, 500W,600W,700W,800W,1000W and so on. they are mainly used for LED light strip, LED module, light piece, light box/lamp house, signboard light.

Specifications:

Notice:

1. Input voltage should be within the specified voltage range (for examples: input voltage 220VAC).

2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment.

3. Prohibited to install power supply in the presence of flammable materials (such as wood products, flammable plastic, etc), to stay away from petrol stations or where prohibited Fireworks.

4. Accurate calculation of load power, peak use, suggested user to use power supply based on power 80% load, do not overload.

5. Power supply have built-in short circuit protection function, when output short circuit, the power will automatically enter the status. Power off after 1 minute and then power on.

6. For safety, properly grounded, the output power cable must be ≥2.5mm²

7. Strictly in accordance with the position indicated by the output terminals of the power supply. It must be firm, check the output line and prohibited to be reversed (input "220VAC" main line, output "+" loaded for positive cathode, output "-" load for negative cathode).

8. Before power, check that the line voltage is compatible with the operating voltage with multimeter (voltage: 220VAC) recognized before it can be closed.

9. Power firm installed vertically (vertically in a place easy to wire the power supply, cover to cover, to be water proof)

12V LED drivers related models list:

Applications:

Constant voltage power supply is mainly used mainly used for LED light strip, LED module, light piece, light box/lamp house, signboard light, line light, wall light, underground light, LED guardrail tube, perforated light etc.

FAQ

1. How many kinds of led drivers you produce?

A: There are many kinds of led drivers: indoor type, rain proof type, waterproof type, ultra thin type, high power type.

2. Do you have CE, ETL approval?

A: Most of products have CE approval, some products have ETL approval.

3. Can I place a sample order?

A: Yes, sample order is available after full test and before delivery. If big quantity, it maybe need 12-18 working days.

4. What about the lead time?

A: 3-5 days for Sample, 8-12 working days for mass production.

5. Which tests do you carry out in your factory?

A: We usually do overload test, 1600V high voltage test and 100% old age test.

6. What is MOQ for led driver?

A: MOQ usually is 100-200pcs except sample order.

7. How do you ship the goods and how long does it take to arrive?

A: We ship by sea, by railway or by sea. If samples, always by express such as FEDEX or DHL etc. It all depends.

8. How about the payment terms?

A: T/T for sample order and small quantity order and L/C for large quantity order.

9. How to start an order with each other?

A: Know your true requirements or application fully, quote based on your requirements and our suggestions, confirms the samples and places deposit for formal order and we arrange the mass production.

10. OEM and ODM is acceptable?

A: Yes. Our cooperation is flexible, OEM or ODM is acceptable.

11: Do you offer warranty period for the products as a part of after sale service?

A: Yes, we offer 3 years warranty for our products after delivery.

12: How to deal with the defectives?

A:

Firstly, our products are produced under strict quality control system and the defective rate will be less than 0.2%.

Secondly, during the guarantee period, we will send new goods together with new order for small quantity.

Thirdly, for defective batch products, we will investigate into the true problems happened, find the real reasons and discuss the suitable solution including recall them based on real situation.