IP67 Waterproof LED Driver 24V 250W Signboard Light Box Led Module Power Supply

Quick Detail:

• Waterproof type
• AC/DC switching 24V 250W 10.5A single-switch LED driver
• AC input voltage: 100~130V or 170-250V
• 1600V High voltage test, full loading test and old aging test
• Constant voltage driver apply for outdoors LED light strip, light box
• IP67 grade
• CE, ETL approvals
• 3 Years Warranty
• Size: 228*72*32mm
• Weight: 950g

Description:

All the products adopt PWM high-frequency pulse width modulation technology, mature standardized production, strict 100% load-carrying aging, high and low voltage impact experiments and complete test records for development & production of LED driver through strictly quality control system and highly responsible attitude, thus have a good quality feedback during application.

Engineerinbg type waterproof led drivers mainly include 12V and 24V series with 20W, 30W, 40W,50W, 60W,80W,100W,120W,150W, 200W,

250W, 300W,400W, 450W, 500W, 550W, 600W.

Apply for LED spotlights, LED light strips, LED street lamps, LED light box, LED module light , LED signboard light, LED bulbs, LED buried lights, LED sky lights, LED flat lights, LED wall washing lights and other LED lamps to provide driving capacity.

Specifications:

Notices:

1. Accurate calculation of load power, peak use, suggested user to use power supply based on power 80% load, do not overload.

2. Power supply have built-in short circuit protection function, when output short circuit, the power will automatically enter the status. Power off after 1 minute and then power on.

3. For safety, properly grounded, the output power cable must be ≥2.5mm²

4. Strictly in accordance with the position indicated by the output terminals of the power supply. It must be firm, check the output line and prohibited to be reversed (input "220VAC" main line, output "+" loaded for positive cathode, output "-" load for negative cathode).

5. Before power, check that the line voltage is compatible with the operating voltage with multimeter (voltage: 220VAC) recognized before it can be closed.

6. Power firm installed vertically (vertically in a place easy to wire the power supply, cover to cover, to be water proof)

Engineering type IP67 LED drivers 12V/24V related models list:

Applications:

Mainly for LED spotlights, LED light strips, LED street lamps, LED light box, LED module light , LED signboard light, LED bulbs, LED buried lights, LED sky lights, LED flat lights, LED wall washing lights and other LED lamps to provide driving capacity. The most important feature is that it is waterproof and can be used outdoors without fear of rain, fog, direct sunlight and other harsh environments.

FAQ

1. How many kinds of led drivers you produce?

A: There are many kinds of led drivers: indoor type, rain proof type, waterproof type, ultra thin type, high power type.

2. Do you have CE, ETL approval?

A: Most of products have CE approval, some products have ETL approval.

3. Can I place a sample order?

A: Yes, sample order is available after full test and before delivery. If big quantity, it maybe need 12-18 working days.

4. What about the lead time?

A: 3-5 days for Sample, 8-12 working days for mass production.

5. Which tests do you carry out in your factory?

A: We usually do overload test, 1600V high voltage test and 100% old age test.

6. What is MOQ for led driver?

A: MOQ usually is 100-200pcs except sample order.

7. How do you ship the goods and how long does it take to arrive?

A: We ship by sea, by railway or by air. If samples, always by express such as FEDEX or DHL etc. It all depends.

8. How about the payment terms?

A: T/T is our main payment terms

9. How to start an order with each other?

A: Know your true requirements or application fully, quote based on your requirements and our suggestions, confirms the samples and places deposit for formal order and we arrange the mass production.

About constant voltage (CV) and constant current (CC) power supply

Power supply is a device that provides electric energy for the load. The power circuit is what converts input electric energy into the desired form and outputs what called "power circuit". Power circuit can be roughly divided "constant voltage power supply" and "constant current power supply".

Waterproof power supply is used in the case of dust-proof with waterproof grade IP67, with multiple protections such as short circuit, over current, overload and so on.

Environmental parameters/electromagnetic compatibility

Operating temperature: -40-80 ℃ (outer surface temperature of the shell)

Storage temperature: -40-85 ℃

Operating humidity :10-90% relative humidity

Mean Life: Mean time between failures (MTBF)50,000 hours

Safety certification: in accordance with UL60950,EN61347

Electromagnetic interference :CISPR15; FCC 47CFR-Part15B Features:

Main features

1. High reliability.

especially like the drive power of LED street lamps, installed in the air, maintenance is not convenient, maintenance costs are also large

2. High efficiency.

LED is energy saving products, driving power efficiency to be high. It is particularly important for the structure of the power supply installed in the lamps and lanterns. Because the luminous efficiency of leds decreases as the LED temperature increases, the heat dissipation of leds is very important. The efficiency of the power supply is high, its consumption power is small, and the heat emitted in the lamps and lanterns is small, which reduces the temperature rise of the lamps and lanterns. It is beneficial to delay the light decay of LED.

3. High power factor.

The power factor is the load requirement of the grid. General 70 watts below the use of electrical appliances, no mandatory indicators. Although the power factor of a single appliance with small power is low, it has little impact on the power grid, but at night when everyone lights up, the same load is too concentrated, it will produce more serious pollution to the power grid. For 30 watts ~40 watts LED drive power supply, it is said that in the near future, there may be a certain index requirement on the power factor.

4. Two kinds of driving methods.

one is a constant voltage source for multiple constant current sources, each constant current source for each LED power supply. In this way, the combination is flexible, one LED failure, does not affect the work of other LED, but the cost will be slightly higher. The other is direct constant current power supply, LED series or parallel operation. It has the advantage of low cost, but poor flexibility, but also to solve a LED failure, does not affect the operation of other LED problems. These two forms coexist for a period of time. Multichannel constant-current output power supply is better in cost and performance. It may be the mainstream direction.

With the increasingly wide application of LED, the performance of LED drive power will be more and more suitable for LED requirements.