24V 72W 3A LED Driver Indoor LED Light Strip, Wash Wall Light LED Power Supply

Quick Detail of LED Driver:

• Indoor aluminum hollow design mini slim shape type
• AC/DC switching 12V 100W 8.5A single-switch LED driver
• AC input voltage: 170~250VAC
• 1600V High voltage test, full loading test and old aging test and constant voltage driver apply for LED strips light, light belt, LED module, light box
• CE, ETL approvals
• Unit Size: 15.9*9.8*4.2CM
• Unit Weight: 337g

Description of LED Driver:
Constant voltage power supply is power circuit that controls output voltage at a constant level. It always provides a constant voltage regardless of the load and is widely used as power supply for electronic circuits.

All these products adopt PWM high-frequency pulse width modulation technology, mature standardized production, strict 100% load-carrying aging, high and low voltage impact experiments and complete test records for development & production of LED driver through strictly quality control system and highly responsible attitude, thus have a good quality feedback during application.

AC/DC LED driver is one kind of power supply for LED light fixtures and bulbs that have different voltage requirements. This driver controls the amount of current that flows through LED unit and ensures that LED unit gets the right amount of voltage and current to operate efficiently without getting damaged.

Specifications of LED Driver:

Notices:
1. Input voltage should be within the specified voltage range (for examples: input voltage 220VAC).
2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment.
3. Prohibited to install power supply in the presence of flammable materials (such as wood products, flammable plastic, etc), to stay away from petrol stations or where prohibited Fireworks.

24V LED drivers related models list:

Applications of LED Driver:
Widely used in LED Lighting, LED display, LED strips, LED advertisement screen, LED sign, LED night light, LED lamp house, LED decoration, LED wall light, LED street light , LED wall light, LED backlight, LED tube, offices , hospital , schools , factories , plants, shopping malls, supermarkets, kitchen, fair cabinet and so on.



FAQ:
1. How many kinds of led drivers you produce?
A: There are many kinds of led drivers: indoor type, rain proof type, waterproof type, ultra thin type, high power type.
2. Do you have CE, ETL approval?
A: Most of products have CE approval, some products have ETL approval.
3. Can I place a sample order?
A: Yes, sample order is available after full test and before delivery. If big quantity, it maybe need 12-18 working days.
4. What about the lead time?
A: 3-5 days for Sample, 8-12 working days for mass production.
5. Which tests do you carry out in your factory?
A: We usually do overload test, 1600V high voltage test and 100% old age test.
6. What is MOQ for led driver?
A: MOQ usually is 100-200pcs except sample order.

Ripple noise (ripple noise voltage) testing

2.1 Definition:

Maximum (P-P) or effective value of the AC voltage component overlapped over DC output voltage.

2.2 Test conditions:

I/P: Nominal

O/P : Full Load

Ta: 25 ℃

2.3 Test circuit:

2.4 Test waveform:

2.5 Description:

2.5.1 The shorter the oscilloscope GND line, the better. The test line should be far away from the PUS.

2.5.2 Using a 1:1 Probe.

2.5.3 The Scope's BW is generally set at 20MHz, but it is better to set the BW to the maximum for the ripple noise of the current network products.

2.5.4 Noise and the use of the instrument, the environment is very different, so the test must indicate the test location.

2.5.5 Test ripple noise shall not exceed the original specification value +1%Vo.

Leakage current testing.

3.1 Definition:

Input the current flowing between the chassis (the chassis must be grounded).

3.2 Test conditions:

I/P: Vin Max) x 1.06 (TUV) / 60 hz

Vin max.(UL1012)/60Hz

O/P: No Load/Full Load

Ta: 25 ℃

3.3 Test circuit:

3.4 Description:

3.4.1 Both L and N need to be measured.

3.4.2 UL1012 R value is 1K5 and TUV R value is 2K/0. 15 uf.

3.4.3 Leakage current Specifications TUV: 3. 5 ma, UL1012:5 ma.