Sealion Series 30W 45W 60W 80W LED Explosion Proof Work Light

1.The KHJ Ex-Sealion Series is a high perforemance, light weight luminaire designed for use in hazardous areas as temporary
lighting and for maintenance tasks ,such as tank cleaning andsand blasting.
2.Suitable for oil&gas,chemical,petro chemical and other potentially explosive industrial environments.

Features And Benefits:
1. High efficacy LED Source with long lifespan>50,000 hours.
2. 5-year performance warranty.
3. Low THD around 10%,Less interference.
4. 5KV Surge Protection.
5. Robust aluminium housing and strong tempered glass.
6. Vibration and shock resistant.
7. Low maintenance.

Product Important Information:

Type Of Protection	Ex d,Ex tb
Protection Standards	(IEC)EN 60079-0, (IEC)EN 60079-1, (IEC)EN 60079-7, (IEC)EN 60079-18, (IEC)EN 60079-31 EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3, EN 60598-1, EN 60598-2-5, EN 62031, EN 62493, IEC 62321-4, IEC 62321-5, IEC 62321-6, IEC 62321-7-1, IEC 62321-7-2, IEC 62321-8
Area Classfiction	Zone 1 and Zone 2 Areas to (IEC)EN 60079-10-1,Zone 21 and Zone 22 Areas to (IEC)EN 60079-10-2
Installation	(IEC)EN 60079-14
Certificate	TÜV 20 ATEX 8608 X IECEx TUR 20.0068X
Equipment Coding	II 2 G Ex db IIC T4/T5 Gb II 2 D Ex tb IIIC T115°C/105°C/T95°C Db IP66
Temperature Class	Rated power (W)	-20℃≤Ta≤+55℃ with Battery		-40℃≤Ta≤+55℃		-40℃≤Ta≤ +65℃
		Gas	Dust	Gas	Dust	Gas	Dust
	30W	T5	T95˚C	T5	T95˚C	T4	T105˚C
	45W	T5	T95˚C	T5	T95˚C	T4	T105˚C
	60W	T5	T95˚C	T5	T95˚C	T4	T105˚C
	80W	T5	T95˚C	T5	T95˚C	/	/
ATEx Coding	II 2 G / II 2 D
Ingress Protection	IP66 (IEC)EN 60529
Cable entry	M20*1.5,M25*1.5,3/4 NPT
CE Mark	The CE marking of this product applies to EU directives 2014/35/EU, 2014/30/EU, 2012/19/EU , 2011/65/EU and 2014/34/EU respectively. The Equipment is declared to meet the provisions of the ATEX directive(2014/34/EU)by reason of the EC Type Examination and compliance with the Essential Health and Safety Requirements

Applications:
1. Cement plants
2. Warehouse
3. Factory
4. Power Genera
5. Power Transmission
6. Shipping industry

Cleaning of luminaire

1·The complete luminaire (without disassemble) can be cleaned with neutral water solution. After cleaning, rinse or wipe dry with clean water.

2·It is forbidden to use any chemical or hydrocarbon solvent cleaner to clean the diffuser, otherwise serious damage may be caused.

3·Please clean the luminaire once a year if it is used under dust environment.

Transportation

1.Weatherproof measures should be taken during transportation.

2.It is strictly forbidden to load and unload violently, and it is strictly forbidden to drop and roll from high altitude, so as to prevent mechanical damage.

Storage

1.The luminaire should be stored in ventilated, non-dropping and non-liquid warehouse at the temperature of -20℃ to +40℃ and relative humidity ≤95%RH.

2.The surroundings should be kept from corrosive gases which may damage metal and insulation.

Why buy from us instead of buying from other suppliers?

1. Good location and convenient transportation.

2. ATEX, IECEx, CE, RoHS certification.

3. Advanced production and processing equipment, environmentally friendly and reliable products.