Energy Saving 120W WaterProof LED Flood Lights 120Lm LED Street Lamp

WaterProof LED Flood Lights Energy Saving Commercial Led Roadway Lighting​

Quick Detail:

Prefect silver stylish appearance Bridgelux/CREE LED chip IP65 Ultra-thin design

Meanwell driver Prefect silver stylish appearance 120W Modular Design

Applications:

These street lights are designed for main road, tunnel, bridge, avenues, highways, crossing, rural road, industrial estate,national road, parks, campus,boat dock, remote area, military base, farm, airport , etc

Advantage:

1. Processed by painting treatment and anodic oxidation, solid and corrosion resisting.

2. Ultra-thin design, prefect stylish appearance, easy to transport, stock and maintain.

3. Waterproof: IP66 Hurricane LV16 resistent

4. Modular design, available Lamp power to satisfy demand.

5. Free of dust and water, suitable for outdoor.

Precautions:
◆ Pack the lamps in the provided carton during transportation, and install foam shock absorption;
◆ After the lamp is installed, check whether the lamp is connected to the electricity correctly, and whether the lamp is fully grounded;
◆ Do not turn on the power before the lamp is fixed;
◆ When using, there is a certain temperature rise on the surface of the lamp, which is a normal phenomenon. ◆When cleaning the lamp, the power switch of the lamp must be cut off and the lamp can be cooled down.
◆ This lamp adopts Y-type connection: If the external cable of this lamp is damaged, the line must be replaced by our company or service agent or a similarly qualified person to avoid danger.

Features:

◆ The light source adopts imported high-end brand solid-state maintenance-free LED light source with high luminous efficiency and a life span of 100,000 hours, which is truly green and environmentally friendly.
◆ The light source is completely isolated from the electrical appliances, which completely solves the heat radiation problem and greatly extends the service life of the lamp.
◆ The electrical appliances adopt the Taiwan MEAN WELL drive power supply, which is recognized as the most stable and most expensive in the industry, with long continuous service life and stable and reliable quality.
◆ Adopt aerospace industry aluminum heat sink, through a professional system heat dissipation design, strictly control the temperature rise, effectively reduce the light attenuation, and greatly improve the service life of the lamp.
◆ The control circuit adopts precise constant current control, with short-circuit, over-voltage, and over-power protection; compatible with wide voltage input, not affected by power grid fluctuations; realizing instant cold and hot start.
◆ Water-proof, dust-proof and moisture-proof, suitable for outdoor use in rainy and snowy weather.

Instructions:
◆ After determining the appropriate installation position of the lamp according to the site environment and lighting needs, prepare the corresponding three-core cable according to the length of the lamp to the 220V power connection;
◆ In the selected installation position, install and fix the lamp with a light pole;
◆ After the lamp is fixed, the lamp must be fully grounded, and the cross-sectional area of the external grounding protection wire cannot be less than 4mm²;
◆ When the power is turned on, the power must be turned on according to the voltage specified on the nameplate.
Note that the brown wire of the external cable of the lamp is connected to the power live wire (ACL), the blue wire is connected to the power neutral wire (ACN), and the yellow-green wire is connected to the power ground wire.

Warning: It is strictly forbidden to open the cover when the power is on!